VC
VPforce ControlsI/JG7_Moto

TelemFFB startup issue

In my case I manually downloaded it, installed the folder under Program Files folder, and when I click on Telem.exe nothing happens
Number481
Number481•56d ago
Moving this to a thread so as not to span the general channel. You had this problem before, didn't you? But you were able to start it from the command prompt? I can't imagine what would be causing it. You're the only person who has ever had the issue. The application is a compiled bundle so all needed components are part of the exe. You don't need any additional software like python installed. Everything gets extracted to the windows temp directory during runtime (including the python dll).
I'm grasping at straws here but.... - Open a windows command prompt (the path you are in does not matter) - just type set and press enter - post the resulting output here
I/JG7_Moto
I/JG7_Moto•56d ago
I was able to make it work again, I copied the path "C:\Program Files\VPforce-TelemFFB-v1.0.0\VPforce-TelemFFB.exe" press enter and the first time it said invalid name, then paste it again, pressed enter again and worked It has to be some software in my PC conflicting. On another note, there are people buying this joysticks bases for DCS who dont know that Telem even exists, I think it makes the Rhino come alive in DCS, should be a Must
Number481
Number481•56d ago
based on the folder name, it looks like you downloaded the older "stable" version. Thats probably not what you want. You should grab the latest zip from https://vpforcecontrols.com/downloads/TelemFFB/?C=M;O=D with the old version, it is possible to start it in a way that would cause pathing issues (for example if you accidentally copied the exe to your desktop instead of just a shortcut).
I/JG7_Moto
I/JG7_Moto•56d ago
Thanks will give it a try
Want results from more Discord servers?
Add your server
More Posts
MSFS trim followingThanks a lot! Haven't been using the WIP version before - makes things much more comfortable to adjuHi, I'm bulding joistick - not ruder soHi, I'm bulding joistick - not ruder so I need two X and Y. I've tried to disable offline motor. AftWow! Thanks for the amazingly fastWow! Thanks for the amazingly fast response. I will check out that info and post an update back hereAh, that totally explains! The specialAh, that totally explains! The special code would be super, I'll just compensate it like flying warbIt shows what appears to be normalIt shows what appears to be normal behavior, all buttons work, no stuck buttonsI've just checked that all looks solidI've just checked that all looks solid and connected , I've also used reset settings to factory whicok. The stick is limp and the black dialok. The stick is limp and the black dial is a ZeroHelloThank you very much in advance, iHelloThank you very much in advance, i have done what you told me and again the same situation.It doI look forward to your settings ☺I look forward to your settings ☺️I can give it a try, I'm not veryI can give it a try, I'm not very technically skilled but willing to try.Any drawbacks? is 20cm extension tooAny drawbacks? is 20cm extension too much?You can test the internal connections byYou can test the internal connections by probing with a multimeter in diode test mode: put the positStep one is make sure you have the rightStep one is make sure you have the right version. The "release" build (0.1.3) didnt have support foBecause of the way TelemFFB takesBecause of the way TelemFFB takes control of the spring for *all* of MSFS, you will need sticky enabGotcha yea the Rhino has no idea what isGotcha.. yea, the Rhino has no idea what is going on inside MSFS as there is no native FFB. Even wiThreadOne person on redditDCS forums is usingOne person on reddit/DCS forums is using #10 spring so it mimics a helicopter. I don't even know whaAny tips for getting it workingAny tips for getting it working correctly? Seems to hold stick position ok, but the stick in sim kee