is your Configurator loading settings upon app launch? I need to manually press Load Settings.
is your Configurator loading settings upon app launch? I need to manually press Load Settings.
BAre you storing the settings after load? Storing will write it to the board.
SI use my rhino with a alpha prime grip. Had no prob. Now suddenly the grip generates spikes. So buttons and ministick generate short inputs without any movement fysically. I can not use it in the apache anymore cause when I use the ministick for aiming it jumps of target randomly. I checked with another alpha prime. Same result. When I connect the warbird grip which has no ministick I see two buttons also light up without fysical movement. When I try the alpha grips on my warbird base I get no problems. So I think the vpforce rhino is broken. I tryed earlier software but I get the input spikes ( don’t know the right word I am not English). I wonder what to do. I would by another grip in an instant but I am afraid it’s the rhino. I have tm tpr rudders converted to ffb on vpforce motor. Works fine. Really puzzled what to do. Left it in shambles today cause tired and late and disappointed. Hope for some help and will get on it after work tomorrow maybe I need to replace some computerboard ar so. Try reinstalling all tomorrow. Quite some work. Thx .
T@walmis I have exactly the same issue with the VPC Alpha Prime after updating to firmware v1.0.17b13
N@SR-F Bob @TheDude9974 - Alpha Prime users can revert to b12 firmware here: https://vpforcecontrols.com/usb/rhino/#force=ffb-rhino_v1.0.17b12.bin
Walmis is working on addressing the ghosting related to the LED enhancement in b13.
Walmis is working on addressing the ghosting related to the LED enhancement in b13.
TThank you, mate 
!
!
Ri have alpha prime with ministick but dont see this. i do have large deadones though for it.
NThe problem with the rhino ffb communication timeout continues. I reduse the max ups amps to 6.5 , but the problem exist. Maybe have to try another psu, I use now meanwell 350/24
KI would bet that the problem is gone with the Meanwell 350/24. I haven't had any problems since I started using it.
NOr maybe I have to update to previous firmware?
NAnd see what gonna happen
NIt is strange , I have no problem for 40min or 1 hour, and suddenly communication is off
WYeah, I'm investigating this particular issue, there are few instances of communications timeout occurring for a few users, but I've not been able to replicate it in the lab, so it's difficult to debug.
N
NThank you @walmis . On the other hand the experience with all the ffb effects are outstanding, I can't go back to spring loaded base.....never!
RI've reproduced this issue with Rhino Loopback on my desktop (not the sim), it seems to only happen with some input devices. Note how when the application is first launched it reads 0 for previously selected axis input and needs reselecting in the drop down to read the current value. Notably, this doesn't affect all input devices (reproduced so far with a BU0836 + PS4 controller axis - Winwing axis all work as expected).
WThanks will look into this
MIs there a way to add custom grip types? I have a NS-37 grip that doesn't play well with any of the preset grips.
WI'll gladly add it - could you map out the hats like in this table (you can copy it): https://docs.google.com/spreadsheets/d/1jyj5VUKgx8KYb_0rTCk0_NimaHjZFaoxHQcyMFH52UI/edit?gid=0#gid=0
Use Generic grip profile.
Does this grip have analog axis ?
Use Generic grip profile.
Does this grip have analog axis ?
Vhello guys so flying the f-5 i find on the pitch its very sensitive and i cannot pu curve as its a known issue but i wanted to ask if maybe there is a way to have more force directly from the middle zone? im pretty new to the configurattor etc
Vi just want it to be more stronger in the middle and then move from there normally
Sput some steeper points in the gain map
Vill try that thx
MHi Walmis. Thanks for the quick response!
I've copied the template and updated it for the NS-37 grip. You should have permission to view and edit. Let me know if there's any other info you'd like me to provide.
https://docs.google.com/spreadsheets/d/1fdNOSp6Hf8tnMT04S3-_ZkTbAwHGWQwifitOt1RJGBo/edit?usp=sharing
Yes, it does have a Z-twist axis.
I've copied the template and updated it for the NS-37 grip. You should have permission to view and edit. Let me know if there's any other info you'd like me to provide.
https://docs.google.com/spreadsheets/d/1fdNOSp6Hf8tnMT04S3-_ZkTbAwHGWQwifitOt1RJGBo/edit?usp=sharing
Yes, it does have a Z-twist axis.
SI do not see b12. Maybe 1.0.17b2 but no 12. Finder doesn’t see it either. And installing b2 does not help anymore. Now I am 57 and no computerwizz. I just believe in this ffb concept. It’s just harder for people like me to sorry.
S
S
STwitching is all of these
Njust update as per normal once you hit that link... it will load the b12 firmware back onto your rhino...
SWilco. Guess I shouldn’t forget the pedals…they ll have to be on the same. Thx
Sthx, but still probs. dont worry, will look at it tomorrow. thx for the help.
BWould need an old configurator as well I'd imagine.
NI switched to v.1.0.17b2 and made the loop back just like the picture, and 2 hours without problem.
N
PAnyone else running into an issue where the latest version of Rhino Loopback is not saving device still?
JFor me it saves the pot sources but not the button source
PSame
SWill try asap. Got the flue and fever. Sorry.
Rthe power cable in my rhino doesn't seat nicely - sometimes the rhino powers up and sometimes it doesn't
if i wiggle the cable or rotate it, it can fix it, or unfix it
if i wiggle the cable or rotate it, it can fix it, or unfix it
R(i received it yesterday)
Rthis is bullshit
Rnow i can't even get it to power up
WWell bummer, this definitely sounds unusual.
Maybe the PSU plug is problematic. Is the fit of the DC plug firm or loose to the Rhino ?
Make sure the emergency stop is not depressed.
Can you make a short video or take some photos of the socket and plug ?
Do you have USB connectivity with the FFB Configurator app?
Maybe the PSU plug is problematic. Is the fit of the DC plug firm or loose to the Rhino ?
Make sure the emergency stop is not depressed.
Can you make a short video or take some photos of the socket and plug ?
Do you have USB connectivity with the FFB Configurator app?
Rplug fit is firm. estop is out.
ffb config says usb connected, motors not
will take video/photos.
ffb config says usb connected, motors not
will take video/photos.
R
RPhotos and video in the album
RI suspect the wires in the lead are broken
WIf you have a similar 5.5/2.5mm barrel PSU around the house (12V to 20V) you can quickly test it to isolate the issue to the PSU.
WOr you can measure the voltage on the plug itself.
OHello, I have a question: If I set the spring to 100%, the maximum travel in y is only 50% of the possible distance. If I set the spring to 0%, the entire distance works. Why is that? see screenshots.
TYou need to add some force comp at the bottom next to your calibration values to account for flex. Hover your mouse over that area and it will explain.