nice view right side not working.
The left nice view is woring asd expected so not sure what's going on.
3 Replies
It sounds like your right nice!view isn't working, but the left one is. Since the left nice!view is working, the issue is likely with the right side specifically.
Here are a few things to check:
1. Is the right half powered on? The right half needs to be on and connected to the left half for the nice!view to work.
2. Are the split halves connected? If your right half isn't typing at all, the two halves might not be communicating. Check out our guide on troubleshooting split halves: https://docs.typeractive.xyz/troubleshooting/split-halves-wont-connect
3. Check the nice!view installation: If you soldered the nice!view headers, double-check the solder joints on both the nice!view and the PCB. If you used no-solder headers, ensure the nice!view is pushed firmly into the headers. You can find the nice!view installation guide here: https://docs.typeractive.xyz/build-guides/corne-wireless/nice-view (or the Lily58 version if applicable).
If you've checked these things and it's still not working, feel free to reply to this message for more help!
yes, using no solder sockets and the left does seem more securely installed than the right side. Not sure why, thats the case, but it
Okay, if the left nice!view feels more secure with the no-solder sockets, it's possible the right nice!view isn't fully seated.
With the no-solder headers, you need to push the nice!view firmly down into the headers on the PCB. The plastic part of the header should be flush with the PCB when fully inserted.
Try carefully pushing down on the nice!view on the right side to ensure it's fully seated in the headers. Be gentle but firm.
If that doesn't resolve it, let me know!