No board named 'nice_nano_v2' found.

Hi has anyone gotten

No board named 'nice_nano_v2' found.

No board named 'nice_nano_v2' found.

when trying to rebuild their keymap? My last successfully built zmk config is now failing to build due to this error. Can't find anything online and the typeractive sample zmk config still has

nice_nano_v2

nice_nano_v2

in the build file so unsure what's going on

TyperAI•12/13/25, 8:38 PM

That error usually means your build environment isn’t actually pulling a ZMK revision that contains the nice!nano boards, or didn’t fetch the modules/boards correctly.

nice_nano_v2

nice_nano_v2

is still what our templates use.

Things to check in your repo:

1) Workflow pin / checkout

In (or similar), confirm it’s checking out (not upstream Zephyr), and that any pinned /ref is valid/current.
If you recently changed a ref/tag/commit, try switching it back to
```
main
```
```
main
```
(or whatever it was when it last built).

2) Board vs shield

Your build matrix should look like and (ex: / , or / ). Don’t put
```
nice_nano_v2
```
```
nice_nano_v2
```
in the shield field.

3) Re-sync to the latest Typeractive template

Easiest sanity check: compare your workflow to the current Typeractive config repos listed here:
https://docs.typeractive.xyz/build-guides/corne-wireless/firmware
https://docs.typeractive.xyz/build-guides/lily58-wireless/firmware

If you paste the build.yml (or the part with the matrix + ZMK checkout) and the exact log line where it fails, I can point out what’s off. Reply here or tag me so I see it.

Firmware | Typeractive.xyz Documentation

If you're not familiar, ZMK is a wireless-focused firmware, and it powers our Corne Wireless.

Firmware | Typeractive.xyz Documentation

If you're not familiar, ZMK is a wireless-focused firmware, and it powers our Lily58 Wireless.

owenmediOP•12/13/25, 8:44 PM

Checked 1 and 2. Mine is fine in those regards. Doesn't seem to be the issue.

For #3, it looks like .github/workflows/build.yml has changed from the last time I pulled the Typeractive template. I'm syncing mine to the latest version and checking if this fixes the issue. Otherwise I'll post the build.yml and logs. Thank you!

owenmediOP•12/13/25, 8:46 PM

It failed still.

TTyperAI That error usually means your build environment **isn’t actually pulling a ZMK r...

owenmediOP•12/13/25, 8:50 PM

I've tried 1, 2 and 3 and nothing worked. Build still failed. Here's the I'm using that comes directly from the Typeractive template.

John•12/14/25, 3:03 AM

ZMK has recently updated

John•12/14/25, 3:04 AM

If you are using “main“, the board is now called “nice_nano“

John•12/14/25, 3:04 AM

No more ..._v2

John•12/14/25, 3:06 AM

I pin mine at 0.3 (dont need to remove ..._v2)

John•12/14/25, 3:06 AM

projects:

name: zmk
remote: zmkfirmware
revision: v0.3
import: app/west.yml