![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
Strange START_PRINT macro on vcore 3.1 500
Hi. Using the default slicing profile I observed that right after the bed mesh 7x7 and a little wait for the temperature the print goes to Y 0 and X negative 7mm - the print head then bumps the left side hard and does a nozzle wipe and starts to print.
Why is this set to do this at -7? How can I either set the wipe to x=0 or set the origin at +7, 0 to allow movement to -7?
Why is this set to do this at -7? How can I either set the wipe to x=0 or set the origin at +7, 0 to allow movement to -7?
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,070Members
Resources
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}