RRC
Rat Rig Community [Unofficial]conscious-sapphire
error v-minion & octopus
Hello. i have a minion with an octopus board, pi3b, ebb42 1.2 toolboard, 4028 fan and i tried to put it into operation. Unfortunately I had the USB VCC jumper on the mainboard that could be heard when there was external voltage and I hope I didn't destroy anything. board could be flashed. but now I have such error messages and since I've never had clippers I don't really know. what do i have to do or is there something wrong? Please help
conscious-sapphire•345d ago
blacksmithforlife•345d ago
looks like it is trying to connect to the wrong board. Did you do https://os.ratrig.com/docs/configuration#initial-configuration and edit your printer.cfg to match your setup?
conscious-sapphire•345d ago
I only selected and flashed the board and the toolboard in the Ratos configurator. then a ratos update and an update of all remaining software such as klipper etc
what do I have to change in the printer.cfg.? does he not know which board that is?
blacksmithforlife•345d ago
go through it line by line - you need to manually make it match your setup. For example, uncomment the line that contains the octopus board you have.
If you have questions, you can come back here and ask specifically what the line means
conscious-sapphire•345d ago
The boards are running đź‘Ť
Want results from more Discord servers?
More PostsStrange oozingWhat might be a reason for this oozing?
Model printed with "external perimeters first" (PrusaSlicer)Ran update, MCU no longer reachableAssume it's due to the thing in #announcements though, i'm on a Octo board, do i missunderstand, butCrowsnest - Webcams wont show work.Hello, I have tryed for hours now and i cant get my cameras to work. I have updated to V4.
My log:Dramatic later shift every layerI have a Vcore 500mm, and I'm experiencing these layer shifts at 15k accel. The grub screws are tighFresh RatOS install Crowsnest brokenJust a heads up, I had to do a manual "git pull" in ssh to update crowsnest when doing a fresh instPoor Bed adhesionHaving trouble with bed adhesion (again). Can't get ASA to stick to it, I have to wash it with soapyMesh levelling stopping about halfway through G29My BLTouch seems to be working, homes fine, but it can't complete a G29 mesh. It stops with the warnIssues w. extruder stepper (LDO-36STH20-1004AHG from lgx lite) since upgrade from RO2.0.0 to v2.0.1my stepper doesn´t work since the upgrade and reflashing the sd card. The stepper doesn´t react, no Strange Bed Level Test ResultHow can I fix this?belt shiftingOk..I have a odd issue that doesn't make any sense. I did a print almost 2 weeks ago and shut the prdouble peaks on YHi, did someone have such graph? Did you managed to fix it? Any ideas why is it so?Part Cooling Fan dauerhaft aktivSeit neuestem ist bei meinem Minion der Lüfter für die Bauteil Kühlung dauerhaft aktiv. Ich konnte lCan't equalize belt tensionI have such graph currently, if I try to tighten lower belt, my gantry moves out of square(when I moBed tilted after G34Hello everybody,
Here is another mesh/homing problem. Maybe a really simple thing, but I don't get Extruder Heater not Heating at Expected RateI've gotten this error message 3 times in a row and I've noticed the temperature on the extruder seefan.cfg benötigtWie muss denn eine Fan.cfg aussehen, wenn ich bei Überschreiten einer vorgegeben Temperatur vom Main