![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
asa warping 270x370mm
I'm trying to print a disk subpart on a v-core 3.1 4028 fan enclusore 2.0.
As long as the printing is going on addog there is nothing wrong however when you finish the print and slowly cool down the table and the part or the heater chamber. Such deformation will occur. What can I do that will reduce the bending of the part.
DEVIL ASA
Camber: 40
I can also heat the chamber if necessary.
Which parameter should be changed? Thank you
As long as the printing is going on addog there is nothing wrong however when you finish the print and slowly cool down the table and the part or the heater chamber. Such deformation will occur. What can I do that will reduce the bending of the part.
DEVIL ASA
Camber: 40
I can also heat the chamber if necessary.
Which parameter should be changed? Thank you
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,070Members
Resources
Recent Announcements
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}