![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
4028 fan
Has there been a change with the new RatOS version, I now see that there are specific presets for 4 wire part cooling fans.
I had my 4028 working before the previous version, plugged like this:
[fan]
pin: !fan_part_cooling_pin
cycle_time: 0.00004
enable_pin: PB11 (HE3) or PA3 (HE1) (tried both)
it is configured like this from this guide https://os.ratrig.com/docs/guides/4028/ (from the running at 100% section)
now it's not event running, either from the UI or when I print something.
I had my 4028 working before the previous version, plugged like this:
[fan]
pin: !fan_part_cooling_pin
cycle_time: 0.00004
enable_pin: PB11 (HE3) or PA3 (HE1) (tried both)
it is configured like this from this guide https://os.ratrig.com/docs/guides/4028/ (from the running at 100% section)
now it's not event running, either from the UI or when I print something.
4028 server fans are becoming a popular option for part cooling because of their light weight and great pressure and flow rates. In this guide we'll go over how to connect one and use it for part cooling. 4-pin fans usually aren't used in 3d printers, and many boards only provide 2-pin ports, but fear not! There's always a way.
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,070Members
Resources
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}