Faulty pcb (RALT FN)?
I just got my F1 v2 delivered today and the RALT doesnt seem to work no matter the switch in. I tried 4 different switches so it seems it's the pcb. I don't really know what to do here
12 Replies
your ralt is probably bound to mo(1) check for that first
via doesn't seem to recognise h87_g2 so i cant check or change keys anyway
tried pressing ralt along random keys and nothing happened
Hello,
The right Alt key is set as the default Fn key, so I think you can connect to VIA and change it to another key and test it.
By default, all H87nu PCBs have the right Alt key as the Fn key.
It appears that you have not enabled the test matrix in the key tester screen. After connecting the board in the via, you will see the test matrix check as shown in the image. By default, it is set to the FN key, so you need to check it in the test matrix.
You can also set it to a different key in the VIA configure tab and test it out.
Hey, it appears VIA cannot identify my PCB:
I also don't see the test matrix option here
https://geon.works/pages/hiney-h87nu-h-install-firmware-and-keymapping
If you take a look at that page and follow the instructions, I think it should work.
GEONWORKS
Hiney H87nu-H Install firmware and keymapping
1. Download the firmware fileDownload Link - Bin file Download Link - Json file 2. Download and install the QMK toolbox (install all drivers)https://github.com/qmk/qmk_toolbox/releases/latest3. Upload the QMK firmware1) Run QMK Toolbox and click Open2) Select the Bin file downloaded in 1).3) Check Auto-Flash 4. Firmw
where is this?
its on the back of your pcb but you can hold Esc while plugging in the USB
I thought I was gonna have to disassemble my shit, tysm
np. just read the thread and I had the same issue with my hiney pcb
I downloaded the latest file from here and flashed it. then it was fixed
https://discord.com/channels/743801649377574924/758177062678298634/1094762198640898179
I got it working
My issue has been solved