Software Engineering Courses (SECourses)•2y ago

@Dr. Furkan Gözükara I have 1962 reg-images i need to filter out which ones I can scale to 1024x1024

@Dr. Furkan Gözükara I have 1962 reg-images i need to filter out which ones I can scale to 1024x1024. Used SOTA on the original images and these are the images it picked out from the main folder, but the images are not cropped/rescaled to 1024 :/

KallamamranOP•12/30/23, 10:44 PM

Don't want to go Birme on 1.962 images

KallamamranOP•12/30/23, 10:44 PM

I don't know what SOTA did because it's not all square images in the folder

KallamamranOP•12/30/23, 10:45 PM

VVlad Hello @Dr. Furkan Gözükara can I please ask you 2 questions? 1. is it better to ...

Xylber•12/31/23, 12:51 AM

I'm not the doc, but I can answer the 1st one: In my experience it is better to train in the base model, and then generate images in the model you want. It not only seems to give slightly better results, but also let you change the model to generate more images without causing ugly results. But I'm sure it depends on the checkpoint you use. For example, traning in RealisticVision and then generating with AmiReal gave me worst results than training in the base model and then generating with AmiReal. My experience, of course, test yourself.

�

🕯Fox Plaid🕯•12/31/23, 1:02 AM

hello im getting this issue when trying to make a sdxl lora with my pc using the rtx 3070ti. what is this error? and what does it mean i have to solve? i followed this torturial but i cant see what im doing wrong i have followed the guide step by step.. https://youtu.be/AY6DMBCIZ3A

message.txt51.5KB

YouTubeSECourses

First Ever SDXL Training With Kohya LoRA - Stable Diffusion XL Trai...

Updated for SDXL 1.0. How to install #Kohya SS GUI trainer and do #LoRA training with Stable Diffusion XL (#SDXL) this is the video you are looking for. I have shown how to install Kohya from scratch. The best parameters to do LoRA training with SDXL. How to use Kohya SDXL LoRAs with ComfyUI. How to do checkpoint comparison with SDXL LoRAs and m...

�

🕯Fox Plaid🕯•12/31/23, 1:04 AM

this is my config

config_sdxl.json3.5KB

�

🕯Fox Plaid🕯•12/31/23, 1:13 AM

i wonder what will happen if i remove the args

�

🕯Fox Plaid🕯•12/31/23, 1:16 AM

wait it says out of memory

�

🕯Fox Plaid🕯•12/31/23, 1:16 AM

huh

�

🕯Fox Plaid🕯•12/31/23, 1:16 AM

what is going on

�

🕯Fox Plaid🕯•12/31/23, 1:18 AM

ohhhhhh it doubles up the steps

�

🕯Fox Plaid🕯•12/31/23, 1:18 AM

wth

�

🕯Fox Plaid🕯•12/31/23, 1:23 AM

man even if i try changing epoch its still out of memoery

�

🕯Fox Plaid🕯•12/31/23, 1:23 AM

this is my current config

config_sdxl.json3.45KB

�

🕯Fox Plaid🕯•12/31/23, 1:27 AM

was a resoloution issue

�

🕯Fox Plaid🕯•12/31/23, 1:31 AM

never mind 8gb vram is too small

�🕯Fox Plaid🕯never mind 8gb vram is too small

BoricuaPab•12/31/23, 1:40 AM

i was able to train my first sdxl lora yesterday using an rtx 2060 super 8gb gpu, for 1 epoch though it took 6hrs

�

🕯Fox Plaid🕯•12/31/23, 1:40 AM

Ahh okay

�

🕯Fox Plaid🕯•12/31/23, 1:40 AM

Nah i think ill wait till lower end hardware can render a lora fast

BoricuaPab•12/31/23, 1:40 AM

it does swap into shared gpu though

FiveSAI•12/31/23, 2:02 AM

Getting quite good results with sd1.5 lora training with new settings

�🕯Fox Plaid🕯Ahh okay

FiveSAI•12/31/23, 2:03 AM

you can also try training the sdxl model on 768x768

�

🕯Fox Plaid🕯•12/31/23, 2:04 AM

I did that on 768x768 but still out of memory

�

🕯Fox Plaid🕯•12/31/23, 2:04 AM

I just think the program is too overkill for my pc

AIGambino•12/31/23, 2:09 AM

Can someone tell me the setting theyre using ot train a 1.5 model I cannot get it working to save my life and nobody seems to have any insight on specific settings

�🕯Fox Plaid🕯I just think the program is too overkill for my pc

FiveSAI•12/31/23, 2:09 AM

are you using xformers and gradient checkpointing ?

�

🕯Fox Plaid🕯•12/31/23, 2:09 AM

Yes

FiveSAI•12/31/23, 2:10 AM

memory efficient attention?

AAIGambino Can someone tell me the setting theyre using ot train a 1.5 model I cannot get i...

FiveSAI•12/31/23, 2:12 AM

depends what are you aiming for ? realism?

AIGambino•12/31/23, 2:14 AM

yeah

FFiveSAI Getting quite good results with sd1.5 lora training with new settings

mikemenders•12/31/23, 7:23 AM

Can you share your training script?

Deleted User•12/31/23, 9:51 AM

--ddp_gradient_as_bucket_view

DDeleted User --ddp_gradient_as_bucket_view

Deleted User•12/31/23, 9:51 AM

Is not working in kaggle

Deleted User•12/31/23, 9:51 AM

Need too much memory

tom•12/31/23, 10:32 AM

I'm having trouble with kaggle. I tried the original Lora training video and got into the Kohya gui without any issues. But, the json file was a no go.

tom•12/31/23, 10:33 AM

Tried the updated tut and now the notebook keeps timing out? Any ideas?

tom•12/31/23, 10:41 AM

Ok, so I got back into the gui. But loading the json file gives me this : Error
Unexpected token '<', " <!DOCTYPE "... is not valid JSON

tom•12/31/23, 10:41 AM

Am I missing a step somewhere?

Ttom Ok, so I got back into the gui. But loading the json file gives me this : Error ...

Benjamin•12/31/23, 10:43 AM

looks like the json file is not correct

Benjamin•12/31/23, 10:43 AM

some error when you downloaded the file

tom•12/31/23, 10:46 AM

Hmm. Tried to redownload the fille. Then noticed kaggle stopped the session again: ^C
Keyboard interruption in main thread... closing server.
Killing tunnel 127.0.0.1:7860

tom•12/31/23, 10:47 AM

This is the file I'm using Kaggle_SDXL_DreamBooth_Best.json. I shows up fine. Copy and paste folder link in gui. But the gui won't even let me create a file like "test1.json

Benjamin•12/31/23, 10:51 AM

by Unexpected token '<', " <!DOCTYPE "... is not valid JSONUnexpected token '<', " <!DOCTYPE "... is not valid JSON it's saying that the file starts with <!DOCTYPE<!DOCTYPE and this isn't the case for a valid json

Ttom Hmm. Tried to redownload the fille. Then noticed kaggle stopped the session agai...

Benjamin•12/31/23, 10:51 AM

are you using the latest kaggle template? normally it is only killing the session with the old kaggle templates that don't use ngrok

Deleted User•12/31/23, 10:55 AM

I have this problem in kaggle

Deleted User•12/31/23, 11:15 AM

update to kaggle dreambooth best .json is not working in kaggle for me

DDeleted User update to kaggle dreambooth best .json is not working in kaggle for me

tom•12/31/23, 11:27 AM

Same. I think maybe kaggle updated something somewhere and errors are popping up. Maybe give it a few days. or ... sigh ... might have to find a gpu. I'm going to muddle around on colab.

tom•12/31/23, 11:27 AM

getting frustrated with kaggle at the moment

Sathish H•12/31/23, 12:27 PM

@Dr. Furkan Gözükara I have been trying to do SDXL dreambooth training on Kaggle. I'm getting below issue. Pls assist

Sathish H•12/31/23, 12:31 PM

My bad.. i figured out localserver was not running. Its resolved. Thanks

@Dr. Furkan Gözükara I have 1962 reg-images i need to filter out which ones I can scale to 1024x1024

Similar Threads

Similar Threads

Similar Threads