Tuning my 500mm Vcore for high speed
I specialize in electronics and not mechanical stuff so I'm a little bit lost here, even after watching some youtube. I don't really know how to interpret my own charts, so I was hoping to get some insight here.
I think my belt tension is probably fine.
The X Resonance has a spike around 125Hz that I haven't been able to smooth out despite tightening most things on the gantry.
Is there anything obvious here that I'm missing?
6 Replies
this video is before I tightened the belts about 3 full turns:
the charts reflect after i turned the belt tension screws. i hear a little extra noise on the y axis movement, but so believe that’s normal for CoreXY machines due to the extra mass in the Y direction