does your TV actually support 1440p?

T

termdisc•2/28/24, 4:43 PM

~ →  sudo f3probe -n -t /dev/nvme0n1
F3 probe 8.0
Copyright (C) 2010 Digirati Internet LTDA.
This is free software; see the source for copying conditions.

WARNING: Probing normally takes from a few seconds to 15 minutes, but
         it can take longer. Please be patient.

Good news: The device `/dev/nvme0n1' is the real thing

Device geometry:
                 *Usable* size: 931.51 GB (1953525168 blocks)
                Announced size: 931.51 GB (1953525168 blocks)
                        Module: 1.00 TB (2^40 Bytes)
        Approximate cache size: 0.00 Byte (0 blocks), need-reset=no
           Physical block size: 512.00 Byte (2^9 Bytes)

Probe time: 1.91s
 Operation: total time / count = avg time
      Read: 53.7ms / 4820 = 11us
     Write: 1.32s / 4192321 = 0us
     Reset: 0us / 1 = 0us

~ →  sudo f3probe -n -t /dev/nvme0n1
F3 probe 8.0
Copyright (C) 2010 Digirati Internet LTDA.
This is free software; see the source for copying conditions.

WARNING: Probing normally takes from a few seconds to 15 minutes, but
         it can take longer. Please be patient.

Good news: The device `/dev/nvme0n1' is the real thing

Device geometry:
                 *Usable* size: 931.51 GB (1953525168 blocks)
                Announced size: 931.51 GB (1953525168 blocks)
                        Module: 1.00 TB (2^40 Bytes)
        Approximate cache size: 0.00 Byte (0 blocks), need-reset=no
           Physical block size: 512.00 Byte (2^9 Bytes)

Probe time: 1.91s
 Operation: total time / count = avg time
      Read: 53.7ms / 4820 = 11us
     Write: 1.32s / 4192321 = 0us
     Reset: 0us / 1 = 0us

~ →  sudo f3probe -n -t /dev/nvme0n1
F3 probe 8.0
Copyright (C) 2010 Digirati Internet LTDA.
This is free software; see the source for copying conditions.

WARNING: Probing normally takes from a few seconds to 15 minutes, but
         it can take longer. Please be patient.

Good news: The device `/dev/nvme0n1' is the real thing

Device geometry:
                 *Usable* size: 931.51 GB (1953525168 blocks)
                Announced size: 931.51 GB (1953525168 blocks)
                        Module: 1.00 TB (2^40 Bytes)
        Approximate cache size: 0.00 Byte (0 blocks), need-reset=no
           Physical block size: 512.00 Byte (2^9 Bytes)

Probe time: 1.91s
 Operation: total time / count = avg time
      Read: 53.7ms / 4820 = 11us
     Write: 1.32s / 4192321 = 0us
     Reset: 0us / 1 = 0us

~ →  sudo f3probe -n -t /dev/nvme0n1
F3 probe 8.0
Copyright (C) 2010 Digirati Internet LTDA.
This is free software; see the source for copying conditions.

WARNING: Probing normally takes from a few seconds to 15 minutes, but
         it can take longer. Please be patient.

Good news: The device `/dev/nvme0n1' is the real thing

Device geometry:
                 *Usable* size: 931.51 GB (1953525168 blocks)
                Announced size: 931.51 GB (1953525168 blocks)
                        Module: 1.00 TB (2^40 Bytes)
        Approximate cache size: 0.00 Byte (0 blocks), need-reset=no
           Physical block size: 512.00 Byte (2^9 Bytes)

Probe time: 1.91s
 Operation: total time / count = avg time
      Read: 53.7ms / 4820 = 11us
     Write: 1.32s / 4192321 = 0us
     Reset: 0us / 1 = 0us

here's an example of its output

T

termdisc•2/28/24, 4:43 PM

if usable size does not equal announced size, the test fails. this is the fastest way to determine whether a card is fake

T

termdisc•2/28/24, 4:44 PM

which is also the fastest way to find out why format errors occur

B

brokenwingsx321•2/28/24, 4:44 PM

T

termdisc•2/28/24, 4:44 PM

whatever

/dev/...

/dev/...

destination is associated with the SD card then

T

termdisc•2/28/24, 4:44 PM

run

lsblk

lsblk

to find out

T

termdisc•2/28/24, 4:45 PM

/dev/mmcblk0

/dev/mmcblk0

is the default

TTwin Nature does your TV actually support 1440p?

D

DevilFish303•2/28/24, 4:45 PM

officially, no. but it goes up to 4k, i don't see why it shouldn't, the tv probably does not report that resolution in its EDID (if that's the thing thats responsible for reporting supported resolutions anyway)

A

antheas•2/28/24, 4:45 PM

new steam update is a bit undercooked but interesting

A

antheas•2/28/24, 4:45 PM

they finally fixed the scaling

A

antheas•2/28/24, 4:46 PM

it crashed when i tried setting the leds

A

antheas•2/28/24, 4:46 PM

but after restarting it worked

A

antheas•2/28/24, 4:46 PM

steam crashed

A

antheas•2/28/24, 4:46 PM

and now it forgot the controller is called playstation

A

antheas•2/28/24, 4:46 PM

dont mind the publicity tho

A

Aru•2/28/24, 4:47 PM

hrm mine just says dualsense edge

A

antheas•2/28/24, 4:47 PM

at least it works hey

A

Aru•2/28/24, 4:47 PM

oh, after the crash gotcha

A

antheas•2/28/24, 4:48 PM

i need everyones thoughts real quick

A

antheas•2/28/24, 4:48 PM

the plan is to bind double pressing QAM to opening the handheld daemon overlay

A

antheas•2/28/24, 4:48 PM

do you think that will cause accessibility issues?

A

antheas•2/28/24, 4:48 PM

since you need to double press

A

Aru•2/28/24, 4:49 PM

yes

A

antheas•2/28/24, 4:49 PM

holding? but that wont work on the ally

A

Aru•2/28/24, 4:49 PM

is there a chord that could be used?

A

antheas•2/28/24, 4:49 PM

not all devices support chords and we cant conflict with steam

A

antheas•2/28/24, 4:50 PM

but im open to ideas

A

Aru•2/28/24, 4:50 PM

swipe down from the top of the screen

A

Aru•2/28/24, 4:50 PM

but joking aside, not sure tbh

A

antheas•2/28/24, 4:50 PM

i was thinking top right

A

antheas•2/28/24, 4:51 PM

but that doesnt work from the couch

A

Aru•2/28/24, 4:51 PM

there's already swipe gestures on bazzite, so they'd conflict no?

A

Aru•2/28/24, 4:51 PM

and yeah, no couch

A

Aru•2/28/24, 4:51 PM

it needs to be a chord if you want to support external controllers

A

antheas•2/28/24, 4:53 PM

I will do qam double press and hold for now, and add a chord in the future

A

antheas•2/28/24, 4:54 PM

i mean both

T

TheSteve0•2/28/24, 4:54 PM

One hour to showtime
playing around with ujust and I do
```
ujust distrobox
```
```
ujust distrobox
```
and the only distros it has in the prompt are bazzite. I know I have an ubuntu, f38, and rocky 8 image on my machine. How do I get those to show up in the prompt

Ttermdisc whatever `/dev/...` destination is associated with the SD card then

B

brokenwingsx321•2/28/24, 4:55 PM

TTheSteve0 1. One hour to showtime 2. playing around with ujust and I do `ujust distrobox` ...

J

j0rge•2/28/24, 4:57 PM

oh lol sorry did my brew pontification bore you last night?

J

j0rge•2/28/24, 4:57 PM

I wrote it up instead so that it's more clearly communicated: https://universal-blue.discourse.group/t/bluefin-is-feature-complete/703/8

Bbrokenwingsx321 Click to see attachment

T

termdisc•2/28/24, 4:58 PM

you left off the arguments

-n -t

-n -t

-n -t

-n -t

T

TheSteve0•2/28/24, 4:58 PM

Oh no - Intellij froze so I kill <lowest java pid> and it crashes the desktop and logs me out :(. Thought that was a sign that I should call it quits for a while

T

TheSteve0•2/28/24, 4:58 PM

@j0rge

J

j0rge•2/28/24, 4:58 PM

linux desktop moment.

Ttermdisc you left off the arguments `-n -t`

B

brokenwingsx321•2/28/24, 5:04 PM

T

termdisc•2/28/24, 5:05 PM

do as it suggests

sudo f3probe -n -t /dev/sda

sudo f3probe -n -t /dev/sda

sudo f3probe -n -t /dev/sda

sudo f3probe -n -t /dev/sda

B

brokenwingsx321•2/28/24, 5:06 PM

Says I don't have access

B

brokenwingsx321•2/28/24, 5:07 PM

And to use f3write/f3read

B

brokenwingsx321•2/28/24, 5:08 PM

How would I write that out

T

termdisc•2/28/24, 5:08 PM

show me the results of

sudo f3probe -n -t /dev/sda

sudo f3probe -n -t /dev/sda

sudo f3probe -n -t /dev/sda

sudo f3probe -n -t /dev/sda

does your TV actually support 1440p?

Similar Threads

Similar Threads

Similar Threads