Software Engineering Courses (SECourses)•2y ago

was updated yesterday just getting the new update transferred to all the servers. still transferring

was updated yesterday just getting the new update transferred to all the servers. still transferring this morning.

Basically when you rent and start the Notebook in the terminal you will see a URL that is the IP address of your vm. Copy the whole thing including the token part of the URL and then you can paste it into your own computer browser

Poppy•5/21/24, 2:16 PM

@Dr. Furkan Gözükara hey again, I haven't downloaded a safetensor from huggingface to runpod before and don't think i'm doing it correctly. I've uploaded the safetonsor to huggingface and have typed wget with the hugging face link. However when this is installed in the lora folder, it installs the whole hugging face folder, when I only need the safetensor. Do you know how I can just instal the safetensor?

PPoppy I've deployed runpod/stable-diffusion:comfy-ui-5.0.0 but it won't let me open th...

Furkan Gözükara SECourses•5/21/24, 2:59 PM

we have runpod auto installer have you tested? https://www.patreon.com/posts/runpod-comfyui-86062569

PPoppy @Dr. Furkan Gözükara hey again, I haven't downloaded a safetensor from huggingfa...

Furkan Gözükara SECourses•5/21/24, 3:00 PM

i will make a tutorial for this

Furkan Gözükara SECourses•5/21/24, 3:00 PM

i should make a quick one in few hours

FFurkan Gözükara SECourses yes but how soon cant tell

gohar•5/21/24, 3:19 PM

Plz consider it..and requested to include the procedure of selecting realvix4.0 instead of base model as i m unable to do it

FFurkan Gözükara SECourses i should make a quick one in few hours

Poppy•5/21/24, 3:43 PM

That would be great! I've been struggling with it all day

PPoppy That would be great! I've been struggling with it all day😅

Furkan Gözükara SECourses•5/21/24, 3:44 PM

yep i understand

Furkan Gözükara SECourses•5/21/24, 3:44 PM

a tutorial just for this

FFurkan Gözükara SECourses we have runpod auto installer have you tested? https://www.patreon.com/posts/run...

Poppy•5/21/24, 4:01 PM

I'll try this as instead I deployed the comfyui for the explore page

PPoppy I'll try this as instead I deployed the comfyui for the explore page

Furkan Gözükara SECourses•5/21/24, 4:03 PM

ye mine is latest version installer

Furkan Gözükara SECourses•5/21/24, 4:03 PM

makes difference

Furkan Gözükara SECourses•5/21/24, 4:03 PM

testing onetrainer vs kohya

FFurkan Gözükara SECourses i generated this for them:d

AIGambino•5/21/24, 5:26 PM

Reddit hates you for some reason lol I was looking at comment section

AAIGambino Reddit hates you for some reason lol I was looking at comment section

Furkan Gözükara SECourses•5/21/24, 5:34 PM

cant be helped

Furkan Gözükara SECourses•5/21/24, 5:34 PM

toxic

Furkan Gözükara SECourses•5/21/24, 5:35 PM

comparing one trainer and kohya

Furkan Gözükara SECourses•5/21/24, 5:35 PM

Furkan Gözükara SECourses•5/21/24, 5:35 PM

i will make a thread later after multiple runs

dsienra•5/21/24, 5:36 PM

@Dr. Furkan Gözükara thanks for the response, but something is not right I did this training many times and I never seen a base model to get so cooked so fast, 30 repetitions 320 imágenes and the model brakes , may be is my dataset and nobregularization but probabably for my case I need to reduce de learning rate or something , this images were used like a sanity check, thanks

Ddsienra @Dr. Furkan Gözükara thanks for the response, but something is not right I did ...

Furkan Gözükara SECourses•5/21/24, 5:37 PM

which config you use and where do you train?

dsienra•5/21/24, 5:41 PM

I train locally on a 3090, I use your last 24gb slow preset, I was changing some parameters like crossatention for a speed up with no gradient checkpointing, I dont remember changing anything else

FFurkan Gözükara SECourses which config you use and where do you train?

dsienra•5/21/24, 5:46 PM

other questions did you tried this new learning rates on the base model for a run at least, may be works perfect on realvis4 but is too high for the base model

Ddsienra I train locally on a 3090, I use your last 24gb slow preset, I was changing some...

Furkan Gözükara SECourses•5/21/24, 5:54 PM

if you are using latest it shouldnt get cooked

Furkan Gözükara SECourses•5/21/24, 5:54 PM

i trained 4500 steps with it

Ddsienra other questions did you tried this new learning rates on the base model for a ru...

Furkan Gözükara SECourses•5/21/24, 5:55 PM

for base model yes could be too high

Furkan Gözükara SECourses•5/21/24, 5:55 PM

you can reduce LR of UNET to 6e-06

Furkan Gözükara SECourses•5/21/24, 5:55 PM

but i havent compared yet

FFurkan Gözükara SECourses for base model yes could be too high

dsienra•5/21/24, 6:30 PM

thanks for your great work, may be, be good if you make a run with your dataset, same settings and samples on the base model to be sure that is consistent on all scenarios.

Furkan Gözükara SECourses•5/21/24, 6:58 PM

tutorial recorded for download upload cloud

FFurkan Gözükara SECourses ye mine is latest version installer

Poppy•5/21/24, 7:35 PM

I've tried it and it's still installing, it's been installing for 3 hours on runpod rtx4090. Surely it shouldn't take so long?

PPoppy I've tried it and it's still installing, it's been installing for 3 hours on run...

Furkan Gözükara SECourses•5/21/24, 8:37 PM

bad pod

Furkan Gözükara SECourses•5/21/24, 8:37 PM

so many bad pods they have

Furkan Gözükara SECourses•5/21/24, 8:37 PM

we have kohya on massed compute

Furkan Gözükara SECourses•5/21/24, 8:37 PM

it is latest version

FFurkan Gözükara SECourses bad pod

Poppy•5/21/24, 8:52 PM

Oh I see. How long should it take?

PPoppy Oh I see. How long should it take?

Furkan Gözükara SECourses•5/21/24, 8:55 PM

install should take like maximum 10 - 15 min

Poppy•5/21/24, 8:55 PM

I can't believe i've waited 5 hours

thank you

Furkan Gözükara SECourses•5/21/24, 8:58 PM

dmn just for install?

Furkan Gözükara SECourses•5/21/24, 8:58 PM

horrific

FFurkan Gözükara SECourses dmn just for install?

Poppy•5/21/24, 9:03 PM

Yes, the comfy ui tutorial you linked for me earlier ha. I think I'll wait for your video tutorial on how to upload lora safetensor from huggingface to runpod

PPoppy Yes, the comfy ui tutorial you linked for me earlier ha. I think I'll wait for y...

Furkan Gözükara SECourses•5/21/24, 9:09 PM

i am editing it

Furkan Gözükara SECourses•5/21/24, 9:09 PM

made a perfect tutorial

randucampos•5/21/24, 9:11 PM

hello Can you make one click for CodeFormer I am a photographer and I just want a sample gradio like the one huggingface I will be a Gold Supporter if you make it

randucampos•5/21/24, 9:12 PM

https://huggingface.co/spaces/sczhou/CodeFormer

CodeFormer - a Hugging Face Space by sczhou

Rranducampos hello Can you make one click for CodeFormer I am a photographer and I just want ...

Furkan Gözükara SECourses•5/21/24, 10:24 PM

sure let me make right now :d

Furkan Gözükara SECourses•5/21/24, 10:24 PM

you can get membership working

Dazzastrous [4090]•5/21/24, 10:30 PM

oh it works well

Furkan Gözükara SECourses•5/21/24, 10:36 PM

installer almost ready testing

Furkan Gözükara SECourses•5/21/24, 10:47 PM

wow this code is old :d