![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
VC3.1 300 fixable without taking it apart?
Hi everyone, I recently got my hands on a used 3.1 in pretty good condition, but I am currently struggling with bed leveling: it's at 0.5mm deviation now and I'd like to make it better
I TRIED FOLLOWING THE DOCUMENTATION AND THE VIDEO INSIDE IT, especially the part with the examples of gantry compensation by unscrewing 4 screws to move it (see photo), but it seems like the gantry barely moves when I do that?
I tried moving my front right corner down to compensate for the rear right being low, and the results only got slightly worse when I tried doing it (from 0.3 to 0.5).
So, is it possible to solve it this way somehow or would I need to disassemble it?
I TRIED FOLLOWING THE DOCUMENTATION AND THE VIDEO INSIDE IT, especially the part with the examples of gantry compensation by unscrewing 4 screws to move it (see photo), but it seems like the gantry barely moves when I do that?
I tried moving my front right corner down to compensate for the rear right being low, and the results only got slightly worse when I tried doing it (from 0.3 to 0.5).
So, is it possible to solve it this way somehow or would I need to disassemble it?
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,034Members
Resources
Recent Announcements
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}