![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
motor noise
Was working fine this morning, went to start another text print and then this noise happened when trying to home.
I can easily turn the screw by hand, feels exactly like the other two.
Checked the pins and reading 2.2ohms between the two pins from each coil, so I can at least confirm the wire is good, stepper probably fine too.
I'm really at a loss. Is the driver dead?
I can easily turn the screw by hand, feels exactly like the other two.
Checked the pins and reading 2.2ohms between the two pins from each coil, so I can at least confirm the wire is good, stepper probably fine too.
I'm really at a loss. Is the driver dead?
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,070Members
Resources
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}