![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
VC4 300 Hybrid belt tension
Hi, I'd appreciate your help and input.
I started tuning the printer and noticed I had the upper belt motor pully upside down.
I flipped it to the correct orientation but now I cant seem to be able to match the belts.
The lower belts is at the end of the tensioner so i cant pull it tighter and I'm not sure if the graph is OK or not.
Printer is not enclosed, leveled on the table, no hybrid belts and the gantry is touching evenly on both sides.
Thanks!
I started tuning the printer and noticed I had the upper belt motor pully upside down.
I flipped it to the correct orientation but now I cant seem to be able to match the belts.
The lower belts is at the end of the tensioner so i cant pull it tighter and I'm not sure if the graph is OK or not.
Printer is not enclosed, leveled on the table, no hybrid belts and the gantry is touching evenly on both sides.
Thanks!
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,034Members
Resources
Recent Announcements
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}