![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
V-Minion PID Fail
Print failed and it was suggested I try a PID which failed. The first pic is the printer running and error message popping up saying head heater not responding as expected. You have to start somewhere so took the printer to bits and changed the head heater element. Bought one that has a connector near the end so easy to change next time and bought a spare. Reassembled everything and still the same. Checked everything but all seemed correct. Then I spotted it .. The little temp sensor was pushed home but there is no home position it just pushes out the other side. Backed it up and put a tie wrap round the cable to hold it in place. Second picture is the PID test. All done and working. Two faults not one. Happy Days ..
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,070Members
Resources
Recent Announcements
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}