![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
IDEX Part cooling fan not responsive
Hi all, just wondering if I have missed any potential troubleshooting points. The NIDEX fan for my T1 will not power up when the machine is activated. I take this as it is not getting any voltage and the problem exists (at this point) with the red and black connectors. Have checked the octopus with a multimeter and it is outputting 12V on the plug per the build guide. The cable is also outputting 12V to the connector but then I can't think of anything to check what the fan is recieving. I have tried to press the connectors together tighter in the barrels but no dice. I've checked the wires are connected correctly (red to red and black to black) and that isn't my issue. Starting to think the fan is dead, but like I said, just wondering if anyone has any other suggestions.
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,070Members
Resources
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}