Blue Yeti Nano USB Microphone not detected/working
Hi, I have problems getting the yeti nano mic to work on my system. Dmesg gives me the following output:
Sadly I don't know how to debug this further and couldn't find anything on google that helped me with the issue. The microphones LEDs do light up, but clicking any of the buttons doesn't do anything and it never shows up in the list of available recording devices. Can someone help me figuring out how to fix this issue or debugginf further?
[ 3084.682827] usb 1-5: new full-speed USB device number 14 using xhci_hcd
[ 3084.810706] usb 1-5: New USB device found, idVendor=046d, idProduct=0ab1, bcdDevice= 4.0a
[ 3084.810721] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3084.810727] usb 1-5: Product: Yeti Nano
[ 3084.810730] usb 1-5: Manufacturer: Blue Microphones
[ 3084.810734] usb 1-5: SerialNumber: 1934SG001U78_888-000303041006
[ 3090.217832] usb 1-5: 1:1: cannot set freq 48000 to ep 0x1
[ 3110.698061] usb 1-5: 2:1: cannot set freq 48000 to ep 0x82
[ 3120.938122] usb 1-5: 6:0: failed to get current value for ch 0 (-110)
[ 3131.178112] usb 1-5: 6:0: cannot get min/max values for control 2 (id 6)
[ 3136.298145] usb 1-5: 5:0: failed to get current value for ch 0 (-110)
[ 3146.538211] usb 1-5: 5:0: cannot get min/max values for control 2 (id 5)
[ 3182.376651] usbhid 1-5:1.3: can't add hid device: -110
[ 3182.377020] usbhid 1-5:1.3: probe with driver usbhid failed with error -110
[ 3187.498463] usb 1-5: 6:0: cannot get min/max values for control 2 (id 6)
[ 3213.098595] usb 1-5: 6:0: cannot get min/max values for control 2 (id 6)
[ 3218.218611] usb 1-5: 6:0: cannot get min/max values for control 2 (id 6)
[ 3238.698252] usb 1-5: 2:1: usb_set_interface failed (-110)
Sadly I don't know how to debug this further and couldn't find anything on google that helped me with the issue. The microphones LEDs do light up, but clicking any of the buttons doesn't do anything and it never shows up in the list of available recording devices. Can someone help me figuring out how to fix this issue or debugginf further?
Solution
After some time I started to look into it again and the mic just decided to randomly work after the 10th or so time of me unplugging and plugging it back in. I don't know what exactly made it work now but not at any time before since I have not changed any settings or anything else on the system in regards to audio or usb drivers.
