![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
What setting should I look into
I print some models and overall they are okay, however if I look from a different angle rather then enface then I get lines and they are quite visible layer when painting the models.
Everything is calibrated, but, perhaps something needs to be calibrated better?
I use z hop
Sunlu matte pla
Mu guess would be extrusion or something with the z axis
Edit: my supports from the same model are much better, I would say 90% flawless.
That got me this King that lowering outer wall speed to what I have on my supports would help, but that does not seems to be the case
Everything is calibrated, but, perhaps something needs to be calibrated better?
I use z hop
Sunlu matte pla
Mu guess would be extrusion or something with the z axis
Edit: my supports from the same model are much better, I would say 90% flawless.
That got me this King that lowering outer wall speed to what I have on my supports would help, but that does not seems to be the case
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,034Members
Resources
Recent Announcements
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}