![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
Extrusion(?) issue on round surfaces
See image - Why is this extrusion situation happening?
Left was printed with tree supports (prusaslicer).
Right was printed without supports.
I thought this was one of many issues due to bimetal effect. I upgraded the x-axis with titanium tube, and the problem persists despite the other known issues to have pretty much resolved.
45 degree overhang
Mostly stock settings on V-Core 4, except I increased retraction to 1mm for this print to see if the results changed. They did not; this looks the same as when I left the retraction at 0.5mm default.
Left was printed with tree supports (prusaslicer).
Right was printed without supports.
I thought this was one of many issues due to bimetal effect. I upgraded the x-axis with titanium tube, and the problem persists despite the other known issues to have pretty much resolved.
45 degree overhang
Mostly stock settings on V-Core 4, except I increased retraction to 1mm for this print to see if the results changed. They did not; this looks the same as when I left the retraction at 0.5mm default.
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,034Members
Resources
Recent Announcements
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}