Moving out of range while unloading filament

10:20
Move out of range: -157.800 50.000 200.000 [0.000]
10:20
Move out of range: -157.800 50.000 200.000 [0.000]
10:20
Move out of range: -157.800 50.000 200.000 [0.000]
10:20
Move out of range: -157.800 50.000 200.000 [0.000]
10:20
Move out of range: -157.800 50.000 200.000 [0.000]
10:20
RatOS | TEMPERATURE_WAIT: Temperature for toolhead T0 reached.
10:19
RatOS: please wait...
10:19
RatOS | TEMPERATURE_WAIT: Waiting for sensor: extruder, MINIMUM: 220
10:19
RatOS: Heating T0 to 220C... Please wait.
10:19
Extruder extruder already active
10:19

INFO

Learn more about the RatOS Filament Macros
10:19
shaper_type_y:ei shaper_freq_y:6.000 damping_ratio_y:0.100000
10:19
shaper_type_x:mzv shaper_freq_x:6.000 damping_ratio_x:0.100000
10:19
pressure_advance: 0.030000
pressure_advance_smooth_time: 0.040000
10:19
RatOS | SET_PRESSURE_ADVANCE: T1
10:19
pressure_advance: 0.030000
pressure_advance_smooth_time: 0.040000
10:19
RatOS | SET_PRESSURE_ADVANCE: T0
10:19
Extruder 'extruder1' now syncing with 'extruder'
10:19
Extruder 'extruder' now syncing with 'extruder'
10:19
Extruder extruder already active
10:14
SET_HEATER_TEMPERATURE HEATER=heater_bed TARGET=55
10:14
RatOS: Homing Z
10:14
G28