![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
T0 Timer Too Close After Purge Blob
I'm having an issue that is completely stopping me from printing anything. At the start of every print right after the purge blob and little line T0 shuts down due to a timer too close error.
I thought this might be due to upgrading to the latest Orcaslicer so I downgraded and the issue still persists.
The toolhead functions fine otherwise, it heats up, extrudes, changes filament, whatever. Its only when I start a print.
Here is the gcode file for a print that has the issue, and also the gcode for a print that did start.
I thought this might be due to upgrading to the latest Orcaslicer so I downgraded and the issue still persists.
The toolhead functions fine otherwise, it heats up, extrudes, changes filament, whatever. Its only when I start a print.
Here is the gcode file for a print that has the issue, and also the gcode for a print that did start.
did_print.gcode19.37MB
did_not_print.gcode19.87MB
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,034Members
Resources
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}