![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
Klipper Screen load/unload IDEX
It seems like the unload macro on Klipper screen can’t be used because it’s not defined for IDEX printers.
The printhead is required to be specified but can’t be done on the screen.
I would suggest, that the homing procedure is required, and the active printhead should be the printhead which is selected on Klipper screen. This should lead to a working macro. If the homing is required must be discussed, but the active printhead should be taken from the selected one from the screen.
The printhead is required to be specified but can’t be done on the screen.
I would suggest, that the homing procedure is required, and the active printhead should be the printhead which is selected on Klipper screen. This should lead to a working macro. If the homing is required must be discussed, but the active printhead should be taken from the selected one from the screen.
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,034Members
Resources
Recent Announcements
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}