Bok, first you want to install coolercontrol with ujust:
ujust install-coolercontrol
Ainstalling
Awhy it takes so much time
Bit's the disadvantage of using atomic distros. Updating the image or installing additional layers is slower. If you're running downloads or game installs over the internet in the background pause them
Amy brother now playing valorant
Bjust be patient then 
BI think the speed is an issue on their server end at this moment. My update is going really slow right now too
Aok now
Adone installing
Bdid it ask you to or run sensors-detect when installing?
AChanges queued for next boot. Run "systemctl reboot" to start a reboot
Complete, please reboot to apply changes
Complete, please reboot to apply changes
Aonly this
Bdo
sensors in the cli to see if you have it up and runningAcoretemp-isa-0000
Adapter: ISA adapter
Package id 0: +56.0°C (high = +105.0°C, crit = +105.0°C)
Core 0: +55.0°C (high = +105.0°C, crit = +105.0°C)
Core 1: +55.0°C (high = +105.0°C, crit = +105.0°C)
BAT0-acpi-0
Adapter: ACPI interface
in0: 16.03 V
power1: 0.00 W
Adapter: ISA adapter
Package id 0: +56.0°C (high = +105.0°C, crit = +105.0°C)
Core 0: +55.0°C (high = +105.0°C, crit = +105.0°C)
Core 1: +55.0°C (high = +105.0°C, crit = +105.0°C)
BAT0-acpi-0
Adapter: ACPI interface
in0: 16.03 V
power1: 0.00 W
Aonly this
Bok. do
sudo sensors-detectsensors-detect version 3.6.0
System: LENOVO 80QQ [Lenovo ideapad 100-15IBD] (laptop)
Board: LENOVO Nano 5B6
Kernel: 6.13.9-103.bazzite.fc41.x86_64 x86_64
Processor: Intel(R) Core(TM) i3-5005U CPU @ 2.00GHz (6/61/4)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): Yes
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 16h thermal sensors... No
AMD Family 17h thermal sensors... No
AMD Family 19h thermal sensors... No
AMD Family 15h power sensors... No
AMD Family 16h power sensors... No
Hygon Family 18h thermal sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
Intel 5500/5520/X58 thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Ait asking to scan more
Aand more
Aand more
Byeah
Bit will end lol
Aended
Bit will ask to confirm and write the config at the end
Ako
Aok
Bif that's all done, you need to reboot
Aand now what its doing
Bafter the reboot sensors should see your temperatures and fan speeds and you should be able to configure them using coolercontrol
B
Awhere to open the sensors
Axd
Bwhen you do
sensorsnow in the cli you should get more readings and you can run coolercontrol from the application launcher / start menuBCoolerControl Documentation
