Right split corne not turning on when on batteries
Until right now the left side of my corne was working just fine and the right side worked only for a brief moment after assembly. However, as of this moment none of the splits are working without a cable. I have tried 4 different batteries with the same result. I'd appreciate some help in how I should move forward. Thanks in advance!
10 Replies
Sorry to hear you're having trouble with your Corne!
First, make sure the power switch is in the "on" position. It needs to be on to charge and operate on battery.
If that doesn't work, try entering the bootloader by double-tapping the reset button. If that doesn't work, try a different USB cable or device.
If it still doesn't turn on, check the battery connection and wiring.
For the right side not working, see the Right Half Not Working guide.
Let me know if any of these steps help! If not, tag me or reply to this message for further assistance.
Entering the Bootloader | Typeractive.xyz Documentation
Learn how to enter the bootloader on your nice!nano.
Right Half Not Working | Typeractive.xyz Documentation
Fix the right half ZMK keyboard.
I tried charging the the left half with a different cable and got it working now, the battery is working and I'm using the left half without a cable
however the right half is only functioning with a cable
currently trying to see whether the battery gets warm when charging. I made sure it's set to ON
thisi s how it looks under the board
so when I tried to disassemble the left split in order to put that working battery on the right split it stopped working. It stopped working
when i adjusted the port a bit it started working again (the left split)
tried the same battery, didn't work on the right split
in fact none of my 4 batteries are faulty, they all worked with the left split
none with the right split
Multimeter showed no continuity
on both PCBs for the battery jack
