Problem on the Installation
I have a Problem installing bazzite on my pc, i have the version downloaded that is for my GPU geeforce 10xx mine is asus gtx 1060 6gb.
I have an i7 10700 CPU.
I have downloaded and flashed the iso file with etcher and then started the Installation. After i select test & install i get these text and nothing Happens.
Can someone help me at this Problem, i wanted to switch from windows to linux gaming but i cant install it.
@Aragon
5 Replies
This means the media does not contain valid image. I suggest going back to the start and making sure it flashes correctly.
1. Make sure you downloaded the whole image file. (It fails at 4%)
2. Make sure you flash drive is large enough.
3. After flashing is completed make sure to disconnect the drive safely (It might still be writing in the background).
4. Try a different USB drive.
I tried to use another usb stick, i tried the gnome and KDE version and flashed that on my usb and i get the same error
The fedora writer Said Installation finished i had no errors there
I cann install bazzite when I don’t do the test and the Installation is successful, i removed the usb stick, when i reboot the system i get a black screen and i can move the mouse on the screen but nothing happens even the reboot doesn’t start exactly
You can skip the test, but without knowing why it failed to verify it should be considered as invalid. (and results from it as suspicious).
Let's start from the top:
1. What edition did you end up choosing? (For example SteamDeck, KDE results in bazzite-deck-stable-amd64.iso)
2. Next to the download button there is a smaller one used for SHA256 verification.
Make sure the checksum matches. (For my example it matches the content of the CHECKSUM file.) Fedora writer will only find errors if the process fails and does not check the sum.
the media check is borked, just skip it
I tried the desktop version, geeforce 9xx 10xx KDE and Gnome, i tested both isos and the checksum matches. I still get that fail if i try to test & install, if i just install i can get through the whole installation and the installation is successful.
When i click reboot system and remove the usb before im stuck on a black screen and can move the mouse, if i don’t remove the usb the system will boot into the perform MOK management mode.
I tried this one from YouTube but it didn’t work "Enroll MOK" -> "Continue" -> "Yes".
'. For the password,
enter "universalblue". Press Enter, then select "Reboot" again.
If I continue boot ill be stuck on Booting……
Now im getting the error code -1
I tested all my drives im using now another ssd and i think it will work now ist booting for the second time after installation, and i flashed the iso with Rufus
After 3rd time booting my screen got black and frozen for 10 mins