Printer Hardware Missing from Configurator Setup Wizard
Hey all,
Is there a reason I'm no longer able to select my hardware in the RatOS Configurator Setup Wizard?
I'm just trying to change my nozzle size back from a 0.2 to a 0.4mm. This is something I've done dozens of times before, but the printer hardware is no longer showing up in the Configurator.
I've already run ratos doctor via SSH, this hasn't worked. Debug.zip is attached below.
Screenshot:
Solution:Jump to solution
You have to select another printer, then reselect your original printer and make sure to click “start fresh”. Somehow the data in moonraker got corrupted.
16 Replies
@miklschmidt sorry for the ping, but is this something you would know the answer to?
Can also confirm that attempting to start the Configurator process again from the Select Your Printer stage doesn't work
Solution
You have to select another printer, then reselect your original printer and make sure to click “start fresh”. Somehow the data in moonraker got corrupted.
Ahhh, thank you, I'll give that a try
Is there anything I should backup before doing that?
Nothing more than the printer.cfg which is already contained within the ratos-debug file
Just confirming this worked, thank you both @miklschmidt @TheTik
Will mark it off as solved
Ok I spoke too soon on this
There's something really weird going on with the Configurator now
I didn't notice when I redid the config yesterday, but now today I'm having issues with the printer when homing
And when I re-check the Configurator settings, I see it is outputting weird things like this
What does EBB42 v1.2false mean? And why is it setting the Y Endstop to an Octopus V1.1 F446 when it knows it's using an Octopus Pro V1.1 H723?
@miklschmidt @TheTik I don't suppose you've seen this before too?
That’s cosmetic, nothing to worry about, it happens if the endstops are set before you chsnge the board, IIRC, it’s only for display purposes, the value doesn’t actually have the name in it.
Thanks Mikl
So the Y endstop being labelled for a Octopus V1.1 F446 doesn't mean RatOS will assign it to a different pin?
No 🙂
Thank you 😊