Wifi connection stuck only on 2.4Ghz

Hello Thank you for your help I have a MSI B50M plus WiFi motherboard and I noticed that it only ever connects to the 2.4 network and not the 5GHz one Also the speeds are always capped at 450Mbits I have checks my router configurations but there are no limits placed on the connection. Also the router is in the same room so it is not a signal issue. Do you have any suggestions on how to fix this? Thank and very much appreciated for your help!
10 Replies
皇家海星
皇家海星2mo ago
tbh easiest way is to get an ethernet cable if the router is in the same room
artolomeus | Andres
well not feasible it is in the same roomm but not next to each other would still need about 5 meters running across the room
皇家海星
皇家海星2mo ago
what is your motherboard? the wifi card more specifically
artolomeus | Andres
from lspci 0a:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter
皇家海星
皇家海星2mo ago
just to make sure, your 2.4 and 5ghz are on different SSIDs, right? i.e. have different name
artolomeus | Andres
no
皇家海星
皇家海星2mo ago
eh that's related to your router settings then the wifi card should be supported in the kernel version in bazzite
artolomeus | Andres
okay i will have a look at the router settings
皇家海星
皇家海星2mo ago
imo you could probably just use 5ghz if you don't need the range of 2.4(which isn't better by a lot, due to other 2.4 interference) if you need the range then you may want to just use separate SSIDs imo the whole 2.4 and 5 on the same ssid is kinda just, not that good in practice from my experience
artolomeus | Andres
okay i see i will have a look then at the router settings so the card is supported thats basically what i wanted to know thank you so much for your help!

Did you find this page helpful?