![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
Vcore4 IDEX : 10mm offset between T0 - T1
ErrorsHello,
I’ve been struggling with this problem for a while. My IDEX VC4 is well calibrated with VAOC, and both nozzles are perfectly centered after the VAOC procedure.
However, when I try to do a multi-filament print, the T1 nozzle is always offset by about 5-10 mm to the left. The issue doesn’t come from the slicer, because even when I switch the extruders in Mainsail, T1 is already offset.
I’ve been struggling with this problem for a while. My IDEX VC4 is well calibrated with VAOC, and both nozzles are perfectly centered after the VAOC procedure.
However, when I try to do a multi-filament print, the T1 nozzle is always offset by about 5-10 mm to the left. The issue doesn’t come from the slicer, because even when I switch the extruders in Mainsail, T1 is already offset.
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,070Members
Resources
Recent Announcements
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}