![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
Nozzle Digs Bed at Start of print
Errors
ExtrusionVoron 2.4 with oct Pro 743 v1,1 , printer worked functionally 6 months ago, i rewired it and upgraded it then lost all my files to flash card failure. it was used printer so i lost everythign i tried for months to get working start print code, but i just do not uderstand Klipper, i had this same issue with marlin, though this is better, I liked the more user friendly RepRap, but want to use all the latest tech so klipper is the only way i can go. I tired klippian and every bit of code i could find on the web, but something was always broke either in the macros or the slicer since so may people use alot of varible that i just cant wrap my head around. once again im a mechanical person not a software guy.
So searching led me to Rat os wich seems to be the solution to my issues, i replaced my cartogropher for new becan and old original oct board for new octo pro so i could install it.
had no issues till checking everytihg thats when endstops would not work on mainboard, they work fine on toolboard, i checked contonity tried programing different endstops, got a new mainboard, but ultimatly its somethign in RC4. so after a week and probly 40ish hours of troubleshooting I relize my only option is sensorless.
Now everytihgn seems to work but now after all the initial start up the nozzle digs the bed, it was fuly coated this mornign and now it has several bare spots form me stopping the bad prints. did a debug not sure how to get the files but here is video as requested
(sorry for any misspells i have sevier dislexia its one of the reasons i struggle with code)
So searching led me to Rat os wich seems to be the solution to my issues, i replaced my cartogropher for new becan and old original oct board for new octo pro so i could install it.
had no issues till checking everytihg thats when endstops would not work on mainboard, they work fine on toolboard, i checked contonity tried programing different endstops, got a new mainboard, but ultimatly its somethign in RC4. so after a week and probly 40ish hours of troubleshooting I relize my only option is sensorless.
Now everytihgn seems to work but now after all the initial start up the nozzle digs the bed, it was fuly coated this mornign and now it has several bare spots form me stopping the bad prints. did a debug not sure how to get the files but here is video as requested
(sorry for any misspells i have sevier dislexia its one of the reasons i struggle with code)
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,034Members
Resources
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}