https://www.amazon.com/Timing-Pulley-20Teeth-Bore-12-7mm/dp/B09YD9J2GR

1PCS HTD 5M 20T Timing Pulley 20Teeth 5M-20T Belt Pulley,Belt Width...

Material:Alloy Number of Teeth:20 Model Number:5M-20T Picth:5mm Outside Diameter:30.69mm Screw Hole:2*M4 Flange:Double Flange

FFrenchy I can try tomorrow unless someone else does. TF51 okay?

SwiftVengeance•8/27/22, 7:30 PM

Ok!

WWilliam Oakes https://www.amazon.com/Timing-Pulley-20Teeth-Bore-12-7mm/dp/B09YD9J2GR

Will3D•8/27/22, 10:47 PM

Thanks. Does it really matter the pulley is 15mm wide. Can you still run a 10mm belt, or just go to 15mm?

WWill3D Anyone have a supplier for 12.7mm bore pulleys?

Speegles•8/27/22, 11:20 PM

FYI, 12.7mm is 0.5 inches. It's those freedom units haha

SSpeegles FYI, 12.7mm is 0.5 inches. It's those freedom units haha

Will3D•8/28/22, 12:10 AM

What's that in buttons then?

Pfhoenix•8/28/22, 12:31 AM

@walmis Virpil just released their Constellation Alpha Prime grip and their new CM3 base

SSalter Really interesting product. I'm bashing my brains with the AH-64's current trim ...

C6_lefuneste•8/28/22, 7:03 AM

I used my Rhino DIY with the Apache. It's really great (even if the last beta introduce some issues with SAS)

WWill3D Thanks. Does it really matter the pulley is 15mm wide. Can you still run a 10mm ...

roller25.•8/28/22, 7:11 AM

I use 15mm belts but I'm sure 10mm is fine.. @walmis can confirm.

WWill3D Anyone have a supplier for 12.7mm bore pulleys?

walmis•8/28/22, 7:17 AM

There's plenty on AliExpess too

WWill3D Thanks. Does it really matter the pulley is 15mm wide. Can you still run a 10mm ...

walmis•8/28/22, 7:18 AM

10mm belt on 15mm is fine (that's what I use on Rhino)

PPfhoenix @walmis Virpil just released their Constellation Alpha Prime grip and their new ...

walmis•8/28/22, 7:18 AM

Nice! But still no FFB

walmis•8/28/22, 7:42 AM

Added support for multiple Rhino USB device instances in the upcoming version. Here's an FFB rudder instance for example.
Windows has a shortcoming when multiple game controllers with the same VID/PID cannot have different names in the device list. So I had to implement ability to change the USB productID.

walmis•8/28/22, 7:43 AM

ddrake1984•8/28/22, 11:13 AM

Are you going to make FFB rudders?

walmis•8/28/22, 11:25 AM

Not yet, this is more for FFB kit applications currently

CC6_lefuneste I used my Rhino DIY with the Apache. It's really great (even if the last beta in...

Salter•8/28/22, 12:51 PM

Thanks for this. I'm glad to hear. Do you keep it in "dead stick" mode when you fly the Apache, or do you also use it in a "return to center" as well? (btw - there's a SAS saturation beep "reduction" workaround. Makes the bug a bit more tolerable - https://forum.dcs.world/topic/307600-sas-saturation/#comment-5036929)

ED Forums

Sas saturation

I fly rather okay, but since about a week I have annoying sound of SAS SATURATION message too often to stand the game. It appears very often except perhaps straight flying. Even small adjustment of throttle causes it. Tried to turn off various channels in A/C utils page, but to no avail. I see a ...

Vladinsky•8/28/22, 1:12 PM

I made a quick sound mod to silence it, just sets the gain to 0. Doesn't seem to cause any of the issues listed

SSalter Thanks for this. I'm glad to hear. Do you keep it in "dead stick" mode when you ...

C6_lefuneste•8/28/22, 5:26 PM

I know for the workaround, because it was me who found and posted it

Of course I use the "FFB trim" mode. That is when I set the trim the stick remains in its current position and efforts are centered for this new position (to be totally honest, it's a little bit in front of the position of the stick when you press the button). The more you move it from the new trimmed position, the more effort you will feel.
If you release the stick, it will go back to the trimmed position. If you reset trim and release the stick, it will go back to default center position.

CC6_lefuneste I know for the workaround, because it was me who found and posted it 😀 Of cou...

Salter•8/28/22, 5:54 PM

The small world of DCS helli flyers

Thanks for this clarification. I suppose that this is exactly how the real Apache (and other Hellis) work.

SSalter The small world of DCS helli flyers 🙂 Thanks for this clarification. I suppose ...