Software Engineering Courses (SECourses)•3y ago

i have a question. Anyone using dreambooth must've come across JOE PENNA dreambooth training tutoria

i have a question. Anyone using dreambooth must've come across JOE PENNA dreambooth training tutorials. In that he uses a set of regularisation images which labelled ''man_unsplash'', these are real life photos of man from the unsplash site which are cropped to 512px square. how does using this man_unsplash dataset differ from using the ''2400photos of man'' provided by @Dr. Furkan Gözükara ??

P1pSl1p•3/8/23, 9:48 AM

yeah, that's straight dreambooth

HolmesCage•3/8/23, 9:48 AM

HolmesCage•3/8/23, 9:48 AM

should i be using other dreambooth?

P1pSl1p•3/8/23, 9:49 AM

when I'm dreambooth training that is unchecked. never tried it when checked so I don't know

P1pSl1p•3/8/23, 9:50 AM

I used Kohya Dreambooth LoRA for my recent results. which is entirely different

HolmesCage•3/8/23, 9:50 AM

yeah i saw tha tho there is no extension for kohya in auto1111

HolmesCage•3/8/23, 9:50 AM

it looks more complicated

P1pSl1p•3/8/23, 9:50 AM

qwen-flux-wan-such

P1pSl1p•3/8/23, 9:51 AM

use that video for install

P1pSl1p•3/8/23, 9:51 AM

then use the settings I posted above

P1pSl1p•3/8/23, 9:51 AM

qwen-flux-wan-such

HolmesCage•3/8/23, 9:53 AM

thanks a lot

vjavad1443•3/8/23, 9:56 AM

Does anybody know why I'm stuck in the loop when run "python relauncher.py" command ?

Python 3.10.6 (main, Nov 14 2022, 16:10:14) [GCC 11.3.0]
Commit hash: 0cc0ee1bcb4c24a8c9715f66cede06601bfc00c8
Installing requirements for Web UI
Launching Web UI with arguments: --port 3001 --listen --enable-insecure-extension-access --share
Killed
Relauncher: Process is ending. Relaunching in 2s...
Relauncher: Launching...
Relaunch count: 1

P1pSl1p•3/8/23, 9:58 AM

I'm off guys. good luck with everything. See ya tomorrow.

Vvjavad1443 Does anybody know why I'm stuck in the loop when run "python relauncher.py" comm...

justalurker•3/8/23, 10:03 AM

Check your startup-webui.bat and clear any command line flags you may have set and try again.

vjavad1443•3/8/23, 10:04 AM

I think something is wrong with Gradio.live cause I'm getting bad gateway error! Maybe they are under DDOS Attack. Are you able to open it ?

bushOP•3/8/23, 10:05 AM

restart pod

bushOP•3/8/23, 10:05 AM

kill port 3000 before launching relauncher.py

bushOP•3/8/23, 10:06 AM

then launch relauncher

justalurker•3/8/23, 10:06 AM

Jjustalurker Click to see attachment

vjavad1443•3/8/23, 10:07 AM

I think my guess was true!

vjavad1443•3/8/23, 10:13 AM

BTW, I'm using mac. Do you know how can I install runpodctl on it?

https://github.com/runpod/runpodctl

I didn't find any instruction

GitHub

GitHub - runpod/runpodctl: RunPod CLI for pod management

RunPod CLI for pod management. Contribute to runpod/runpodctl development by creating an account on GitHub.

justalurker•3/8/23, 10:15 AM

Just pip'n the url doesn't work for you?

vjavad1443•3/8/23, 10:15 AM

do you know what command should I use in terminal on mac ?

justalurker•3/8/23, 10:15 AM

%pip install git+https://github.com/runpod/runpodctl/releases/tag/v1.9.0

vjavad1443•3/8/23, 10:16 AM

job not found

Jjustalurker %pip install git+https://github.com/runpod/runpodctl/releases/tag/v1.9.0

vjavad1443•3/8/23, 10:17 AM

it looks like the command is wrong

vjavad1443•3/8/23, 10:18 AM

you sure about using "%" before pip and "+" after git ?

justalurker•3/8/23, 10:21 AM

I don't use mac, that's the cmd I would use in colab or unbutu.

vjavad1443•3/8/23, 10:21 AM

I see, Ok

justalurker•3/8/23, 10:23 AM

Again not sure about mac, but sometimes you can just type install runpodctl

justalurker•3/8/23, 10:29 AM

Try this

justalurker•3/8/23, 10:29 AM

wget --quiet --show-progress https://github.com/runpod/runpodctl/releases/download/v1.9.0/runpodctl-darwin-arm -O runpodctl && chmod +x runpodctl && sudo mv runpodctl /usr/local/bin/runpodctl

justalurker•3/8/23, 10:30 AM

@vjavad1443 github said that's how to install on a mac

Jjustalurker wget --quiet --show-progress https://github.com/runpod/runpodctl/releases/downlo...

vjavad1443•3/8/23, 10:30 AM

yes it didn't work

TTrimac Ey guys! In dreambooth do you have to select specific 1.5 model on top?

Furkan Gözükara SECourses•3/8/23, 10:31 AM

you can use any model but training results probably wont be good as using 1.5 because these models are baked

justalurker•3/8/23, 10:31 AM

ok, https://github.com/runpod/runpodctl has various install directions, maybe something there will work

VVirus Do you guys know any information on how to utilize ControlNet to indicate the lo...

Furkan Gözükara SECourses•3/8/23, 10:33 AM

in this video i explained which part is which part you seen? https://youtu.be/iFRdrRyAQdQ

YouTubeSECourses - Software Engineering Courses

Fantastic New ControlNet OpenPose Editor Extension & Image Mixing -...

Our Discord : https://discord.gg/HbqgGaZVmr. In this video, I am explaining how to use newest extension OpenPose editor and how to mix images in ControlNet. If I have been of assistance to you and you would like to show your support for my work, please consider becoming a patron on

https://www.patreon.com/SECourses

Playlist of #StableDiffusio...

TTrimac On going training on dreambooth. I wanted to cancel my training progress since i...

Furkan Gözükara SECourses•3/8/23, 10:34 AM

i think it saves last step in diffusers weights. if not it uses last checkpoint

PP1pSl1p https://www.youtube.com/watch?v=sRdtVanSRl4&t=662s

Trimac•3/8/23, 10:34 AM

Okay for 5hrs working on this video following this settings for 8bitAdaw with exact parameters. Well, it did not get me precise results on my subject images "face" it looks like the subject but not good at all. Therefore settings from other may not work for others. Im thinking it dependes on what gpu we are running. Im running rtx 3060 12gb latest drivers updated. The man used higher graphics.

Vvjavad1443 @Dr. Furkan Gözükara Hi Dr, I'm truly appreciate for your time and effort. I've ...

Furkan Gözükara SECourses•3/8/23, 10:35 AM

i say yes use xformers 0.0.17 and ema

Bbush i have a question. Anyone using dreambooth must've come across JOE PENNA dreambo...

Furkan Gözükara SECourses•3/8/23, 10:36 AM

i havent checked. but you can use only man or photo of man as classification. it works even without classification but i found classification improves styling capability for faces

Vvjavad1443 Does anybody know why I'm stuck in the loop when run "python relauncher.py" comm...

Furkan Gözükara SECourses•3/8/23, 10:37 AM

change the loop in relauncher.py

TTrimac Okay for 5hrs working on this video following this settings for 8bitAdaw with ex...

Furkan Gözükara SECourses•3/8/23, 10:38 AM

could be related to your training dataset

Furkan Gözükara SECourses•3/8/23, 10:38 AM

no backgrounds clothes should be same

TTrimac Okay for 5hrs working on this video following this settings for 8bitAdaw with ex...

Furkan Gözükara SECourses•3/8/23, 10:47 AM

my computer also has 12 gb rtx 3060. it really looks good. you should be able to get good results same as base test on that video

FFurkan Gözükara SECourses i say yes use xformers 0.0.17 and ema

vjavad1443•3/8/23, 10:51 AM

So in youtube video you said the address we should run those commands ( uninstall ) is located in /workspace/venv/lib/python3.10

but for me there is no venv in workspace folder

I can find it in this address:
/workspace/stable-diffusion-webui/venv/lib/python3.10

vjavad1443•3/8/23, 10:51 AM

Is that ok?

Vvjavad1443 So in youtube video you said the address we should run those commands ( uninstal...

Furkan Gözükara SECourses•3/8/23, 10:51 AM

in unix

Furkan Gözükara SECourses•3/8/23, 10:51 AM

it works wherever you run actually

i have a question. Anyone using dreambooth must've come across JOE PENNA dreambooth training tutoria

Similar Threads