Software Engineering Courses (SECourses)•3y ago

like here, they arwe all real photos from unsplash

vjavad1443•3/8/23, 11:11 AM

This command didn't work as well

Screen_Shot_2023-03-08_at_4.11.13_AM.png

Bbush i was actually talking about the content of the images and not the name of class

Furkan Gözükara SECourses•3/8/23, 11:15 AM

the images are generated by the name of class

AArvy I had my 40gb vram card run out of memory several times yesterday on Runpod. I s...

Furkan Gözükara SECourses•3/8/23, 11:15 AM

it totally depends on configuration

Bbush like here, they arwe all real photos from unsplash

Furkan Gözükara SECourses•3/8/23, 11:16 AM

if you want to fine tune model

Furkan Gözükara SECourses•3/8/23, 11:16 AM

improve quality

Furkan Gözükara SECourses•3/8/23, 11:16 AM

then you can feed better images

Furkan Gözükara SECourses•3/8/23, 11:16 AM

the classification image logic is

Furkan Gözükara SECourses•3/8/23, 11:16 AM

harder to explain quickly

Furkan Gözükara SECourses•3/8/23, 11:16 AM

but i am planning a video for that

Vvjavad1443 This command didn't work as well

vjavad1443•3/8/23, 11:17 AM

I used this command instead and it worked:

pip install xformers==0.0.17.dev464

Is it ok ?

Bbush like here, they arwe all real photos from unsplash

bushOP•3/8/23, 11:17 AM

gotcha. also, one more thing. so I have the deleted the pod on which i trained yesterday. but now I want to fine tune the model even more. the steps will be the same?

Vvjavad1443 I used this command instead and it worked: pip install xformers==0.0.17.dev464 ...

Furkan Gözükara SECourses•3/8/23, 11:18 AM

yep

Bbush gotcha. also, one more thing. so I have the deleted the pod on which i trained y...

Furkan Gözükara SECourses•3/8/23, 11:19 AM

you need to upload same model

Furkan Gözükara SECourses•3/8/23, 11:19 AM

to continue training

Furkan Gözükara SECourses•3/8/23, 11:19 AM

or it will beging from 0

bushOP•3/8/23, 11:20 AM

oh yes that i'll upload, do i select this model as the base model in dreamboot and then create another new dreambooth model?

Bbush oh yes that i'll upload, do i select this model as the base model in dreamboot a...

Furkan Gözükara SECourses•3/8/23, 11:21 AM

yep that is the idea

bushOP•3/8/23, 11:21 AM

cool.

bushOP•3/8/23, 11:24 AM

can i use 2GPUs that'll give me 48gb vram and 83gb ram in total or i have to use one 1 gpu

Furkan Gözükara SECourses•3/8/23, 11:27 AM

You can't combine vram of them atm

Furkan Gözükara SECourses•3/8/23, 11:27 AM

But you can run 2 instance of web ui

bushOP•3/8/23, 11:28 AM

vjavad1443•3/8/23, 11:41 AM

Launch errors detected: ['Incorrect version of torch installed.', 'Incorrect version of torchvision installed.']

Screen_Shot_2023-03-08_at_4.40.57_AM.png

vjavad1443•3/8/23, 11:41 AM

I followed exactly your commands

Trimac•3/8/23, 11:43 AM

Test 3 of todays dreambooth config used from the video except learning rate. I change from .000002 to .000006 to .000001 and change my epoch from 200 to 180, 15 image. Daam Sd its like spending my whole life

Vvjavad1443 I followed exactly your commands 😦

vjavad1443•3/8/23, 11:45 AM

[!] torch version 1.13.1+cu116 installed.
[!] torchvision version 0.14.1+cu116 installed.
[+] accelerate version 0.16.0 installed.
[+] bitsandbytes version 0.35.4 installed.
[+] diffusers version 0.13.1 installed.
[+] transformers version 4.26.1 installed.
[+] xformers version 0.0.17.dev464 installed.
Launch errors detected: ['Incorrect version of torch installed.', 'Incorrect version of torchvision installed.']

Vvjavad1443 [!] torch version 1.13.1+cu116 installed. [!] torchvision version 0.14.1+cu116 i...

vjavad1443•3/8/23, 11:47 AM

Would you plz tell me what's I'm doing wrong ?

Vvjavad1443 Would you plz tell me what's I'm doing wrong ?

Furkan Gözükara SECourses•3/8/23, 11:51 AM

ok do this

Furkan Gözükara SECourses•3/8/23, 11:51 AM

pip uninstall torchvision

Furkan Gözükara SECourses•3/8/23, 11:51 AM

pip uninstall torch

Furkan Gözükara SECourses•3/8/23, 11:51 AM

restart web ui

vjavad1443•3/8/23, 11:53 AM

So no need to install torch ?

vjavad1443•3/8/23, 11:57 AM

So I think after restarting the system installed by itself. and here is the result . But when I go to dreambooth all buttons are disabled

Screen_Shot_2023-03-08_at_4.57.01_AM.png

vjavad1443•3/8/23, 11:58 AM

bushOP•3/8/23, 11:59 AM

click on create tab

Bbush click on create tab

vjavad1443•3/8/23, 12:00 PM

Now it's ok

bushOP•3/8/23, 12:02 PM

Furkan Gözükara SECourses•3/8/23, 12:04 PM

ye now looks good

Furkan Gözükara SECourses•3/8/23, 12:17 PM

recorded a new video to just show

Furkan Gözükara SECourses•3/8/23, 12:17 PM

how to install on runpod lol :d

Aurora 神名河•3/8/23, 12:17 PM

T_T why does my multi-controlnet isn't working?

AAurora 神名河 T_T why does my multi-controlnet isn't working?

Furkan Gözükara SECourses•3/8/23, 12:17 PM

must be misisng some step

Furkan Gözükara SECourses•3/8/23, 12:17 PM

dont forget git pull

Aurora 神名河•3/8/23, 12:18 PM

I can't use use it properly for some reasons
I can only use it for only 1 controlnet per generation.
If I tried to use 2 controlnet in the same time only the first, controlnet will be applied