Hey, you can use the WinWing adapter profile:

walmisOP•3/12/23, 9:39 AM

union {
  struct {
   uint8_t buttons[7];
   uint8_t reserved;
   int16_t axis[4]; // range 0..4096, center at 2048
  } __attribute((packed));
  uint8_t data[16];
 } ;

union {
  struct {
   uint8_t buttons[7];
   uint8_t reserved;
   int16_t axis[4]; // range 0..4096, center at 2048
  } __attribute((packed));
  uint8_t data[16];
 } ;

TTheAmazinGreat This is the main issue I am having getting the data into the correct bytes. When...

walmisOP•3/12/23, 9:42 AM

My guess is you need to setup an interrupt on the ~CS line falling edge to reload the buffer/counter to transmit over SPI

ddrake1984•3/12/23, 9:58 AM

I have a weird bug, this image does not go away

walmisOP•3/12/23, 9:59 AM

X does not close it?

ddrake1984•3/12/23, 10:00 AM

neg

walmisOP•3/12/23, 10:02 AM

no idea, something's up with MS Edge

Wwalmis Yeah, the spring effect in "effects" tab adjusts the spring when no FFB game is ...

Khangirey•3/12/23, 10:09 AM

Thanks. So as I understand, the effects tab doesn't affect DCS in any way? It doesn't matter whether I have various options checkmarked, they will work regardless?

KKhangirey Thanks. So as I understand, the effects tab doesn't affect DCS in any way? It do...

walmisOP•3/12/23, 10:12 AM

Spring is overridden by DCS, however Damper and others will work, since DCS doesn't control the damper effect for example.
The whole idea is to make the stick work as a regular springed/damped stick that you set it in the configurator when no FFB aware programs are controlling it.

Wwalmis Spring is overridden by DCS, however Damper and others will work, since DCS does...

Khangirey•3/12/23, 10:13 AM

Gotcha. So otherwise, Damper will still as as a multiplier (ex 50%x100%) between the two tabs

walmisOP•3/12/23, 10:14 AM

yep

TheAmazinGreat•3/12/23, 12:55 PM

Thanks Walmis I’ll give it a try!

Wwalmis Hey, you can use the WinWing adapter profile:

TheAmazinGreat•3/12/23, 6:49 PM

https://tenor.com/view/working-anakin-starwars-gif-4653092

Tenor

Sskeleton negative the config is saved to your base afaik, so the stick doesn't know of th...

Hotshot•3/13/23, 6:42 AM

Oh... that's unfortunate. But makes sense, as the base has the space for the controller and memory, I guess

Smorgus•3/15/23, 4:31 AM

I just applied reverse polarity to the motor. How screwed am I?

Smorgus•3/15/23, 4:34 AM

Seems I just blew this guy (diode top right)

Smorgus•3/15/23, 4:34 AM

I assume I can just replace that diode and call it a day?

walmisOP•3/15/23, 5:01 AM

Oh jeez, reverse polarity could kill most ICs, depends on luck. That TVS took the most of it. You can try unsoldering it and checking for shorts on 5V and 3V3 lines to GND.

Smorgus•3/15/23, 5:10 AM

I got lucky, it all works

Smorgus•3/15/23, 5:10 AM

I’ve just eaten up the reverse polarity diode, so I just can’t make the same mistake again

ddrake1984•3/15/23, 6:06 AM

ooh, lucky duck

ddrake1984•3/15/23, 6:06 AM

I guess.. lucky chicken

Polack-1•3/15/23, 8:51 AM

Damn lucky

SSmorgus I just applied reverse polarity to the motor. How screwed am I?

peachmonkey•3/15/23, 7:27 PM

reversing the polarity only seems to work in startrek

Ppeachmonkey reversing the polarity only seems to work in startrek 😄

smitty•3/15/23, 7:39 PM

and ghostbusters

TheAmazinGreat•3/15/23, 11:52 PM

Got everything wired up to bench test and I am getting smooth movement in the motors like the anti-cogging is working but not getting any signal to the VP-Force Software that I can tell. X, Y, dx, dy, etc are all "-" and do not change when plugged into USB or with power on. Is there a setting I am missing before I can start seeing input from the board?

TheAmazinGreat•3/16/23, 12:16 AM

Figured it out, hardware issue.

TTheAmazinGreat Figured it out, hardware issue.

walmisOP•3/16/23, 5:07 AM

Glad you solved it! What was the issue?

TTheAmazinGreat Figured it out, hardware issue.

Havebug•3/16/23, 6:28 AM

I'm interested too, how'd you solved?

Khangirey•3/16/23, 8:58 AM

idk if this is part of the telemetry or dcs, but with the SU-25, when you extend the airbrake, the stick "clicks" back and forth weirdly. It doesn't feel like a normal effect, feels like a bug

KKhangirey idk if this is part of the telemetry or dcs, but with the SU-25, when you extend...

walmisOP•3/16/23, 10:03 AM

Yeah I recall this, DCS bug

Wwalmis Glad you solved it! What was the issue?

TheAmazinGreat•3/16/23, 12:27 PM

Motor signal wires needed to be swapped on one end of the plugs. I noticed on the board the plug was B/A and on the motor the plug was A/B. Cable needed to have a crossover between the two plugs to get A/A and B/B to match.

Havebug•3/16/23, 12:50 PM

were you using the cables that come with the kit or did you build them by yourself?

skyPickle•3/16/23, 1:10 PM

is the next version of vpconfigurator (with the 'stick to trimmer mode' button option) on a scheduled release?

SskyPickle is the next version of vpconfigurator (with the 'stick to trimmer mode' button o...

walmisOP•3/16/23, 1:15 PM

Yes, almost there

HHavebug were you using the cables that come with the kit or did you build them by yourse...

TheAmazinGreat•3/16/23, 1:21 PM

The cables as supplied with the kit. I went back and looked at pics of other kits and they have it configured with the crossover as I mentioned. Based on that I think mine is an isolated issue but probably fair to say if you DIY then just double check.

Wwalmis Yes, almost there

amadeus•3/16/23, 7:05 PM

hype!

Hextopia•3/16/23, 9:22 PM

I'm having a weird issue where the Rhino base is no longer recognized as a USB device by windows

Hextopia•3/16/23, 9:24 PM

When I plug it in, I get the normal beeps from the base, but windows throws an error saying the device isn't recognized (Device Descriptor Request Failed)

Hextopia•3/16/23, 9:25 PM

It briefly showed up in the FFB configurator earlier today when I was trying out different USB ports to see if I could get one to recognize it, but it went back to not being recognized again shortly thereafter, and crashed the configurator in the process

Hextopia•3/16/23, 9:26 PM

Any suggestions on things to try? I've already done all the standard stuff like different ports, restarting windows, etc.

HHextopia When I plug it in, I get the normal beeps from the base, but windows throws an e...

TheAmazinGreat•3/17/23, 2:08 AM

I got this same error when I plugged in my board for the first time due to an improperly wired USB connector. If your Rhino was working previously maybe something jiggled loose between the main board and USB plug. @leninjahd described something similar above too when I asked about my error.

Hextopia•3/17/23, 2:13 AM

I guess I could try taking it apart and see if there's anything loose inside it

Hextopia•3/17/23, 2:13 AM

It's about all I've got left to try

HHextopia I guess I could try taking it apart and see if there's anything loose inside it

walmisOP•3/17/23, 5:10 AM

Could be the USB wiring on the usb socket side. You can try to unscrew it and pull it from the front and check if any wires didn't come loose.
Either way it's a bummer, but I'll send you a replacement cable or main board if needed.

Hextopia•3/17/23, 5:24 AM

I tried a different cable and no joy there

Hextopia•3/17/23, 5:25 AM

I'll pull the socket out and see if something came loose tomorrow

Will3D•3/18/23, 4:05 AM

Hi. Got life in one axis of my kit build for the first time. (Waiting on belt for other axis) It all feels really nice, however there is quite a lot of natural dampening going on. I want to use this for helis as well, which will mean I want an almost "floppy" stick with very little resistance/dampening. How can I achieve this ? Natural Damping compensation goes some of the way, but any higher than about 17% and I get sound uncontrolled bouncing off the limits.

Will3D•3/18/23, 5:12 AM

WWill3D Click to see attachment

PiNKSH!T•3/18/23, 5:15 AM

nice work m8, what's the 'extra' roller for that looks adjustable, at the fron of the picture touching the belt. Is that just to adjust the belt tension?

Hey, you can use the WinWing adapter profile:

Similar Threads