Is it normal the Sanity Sample Prompt is always the same image?
Is it normal the Sanity Sample Prompt is always the same image?
Fhi video posted
Fnope it means not learning
FAMAZING !!! Thank you
Fdmn i have forgatten to apply sound improvement to the video :/
Fwhat do you think about my thumbnail
Danyone have any tips on choosing a pod with enough vram? I keep choosing ones that have more than 48 for instance but then it shows it is only running at 17? does that make sense? my training samples come out black boxes. I just had a great pod the past 5 or 6 days running well but it was scheduled for maintenance and forgot my selection.
Di believe i had an A6000 but I've tried all day with no luck to get it to work...maybe I used fp16 instead of bf16?
II'm using Runpod, great for GPU, but download speed is...meh.
II had your same problem, switched to fp16 and that did the trick.
WFinally I was able to training my face and get a checkpoint which is like me. But any prompt I putt on the text box in tx2img dont change my image at all.
Walways same style.
Fyou dont need that much. i think 20 gb vram is more than enough for many cases
Fcould be overtraining
Fdid you compare checkpoints?
FYouTubeSECourses - Software Engineering Courses
RunPod: https://bit.ly/RunPodIO. Discord : https://bit.ly/SECoursesDiscord. Web UI DreamBooth got epic update and we tested all new features to find the best settings (10). If I have been of assistance to you and you would like to show your support for my work, please consider becoming a patron on 
https://www.patreon.com/SECourses
Playlist of...
https://www.patreon.com/SECoursesPlaylist of...
Fi got to sleep hopefully see you later
WOk thank you
FHi! Thanks for the new tutorial I followed and now I´m getting this errors. WebUI opens and works but Dreambooth doesn´t appear
#######################################################################################################
Initializing Dreambooth
If submitting an issue on github, please provide the below text for debugging purposes:
Python revision: 3.10.6 (tags/v3.10.6:9c7b4bd, Aug 1 2022, 21:53:49) [MSC v.1932 64 bit (AMD64)]
Dreambooth revision: 8e7277b7ec30801753e3591e0e1139b97ec88e56
SD-WebUI revision:
Checking Dreambooth requirements...
Failed to install Dreambooth requirements.
[+] torch version 1.13.1+cu117 installed.
[+] torchvision version 0.14.1+cu117 installed.
[!] xformers version 0.0.16rc425 installed.
[+] accelerate version 0.17.1 installed.
[+] bitsandbytes version 0.35.4 installed.
[!] diffusers NOT installed.
[+] transformers version 4.27.1 installed.
Launch errors detected:
Incorrect version of xformers installed.
diffusers not installed.
#######################################################################################################
Also this:
ModuleNotFoundError: No module named 'diffusers'
#######################################################################################################
Initializing Dreambooth
If submitting an issue on github, please provide the below text for debugging purposes:
Python revision: 3.10.6 (tags/v3.10.6:9c7b4bd, Aug 1 2022, 21:53:49) [MSC v.1932 64 bit (AMD64)]
Dreambooth revision: 8e7277b7ec30801753e3591e0e1139b97ec88e56
SD-WebUI revision:
Checking Dreambooth requirements...
Failed to install Dreambooth requirements.
[+] torch version 1.13.1+cu117 installed.
[+] torchvision version 0.14.1+cu117 installed.
[!] xformers version 0.0.16rc425 installed.
[+] accelerate version 0.17.1 installed.
[+] bitsandbytes version 0.35.4 installed.
[!] diffusers NOT installed.
[+] transformers version 4.27.1 installed.
Launch errors detected:
Incorrect version of xformers installed.
diffusers not installed.
#######################################################################################################
Also this:
ModuleNotFoundError: No module named 'diffusers'
FAnd this:
NameError: name 'DreamboothConfig' is not defined
NameError: name 'DreamboothConfig' is not defined
FPlease help,
II did some training on Runpod again, first impressions:
I1) It is using less VRAM than 2 days ago
Until 2 days ago, I was only able to work with 48 VRAM. Now I'm using 24 GB, with heavy settings, and it uses 15-18 GB. With light settings even less than 6 GB.
Until 2 days ago, I was only able to work with 48 VRAM. Now I'm using 24 GB, with heavy settings, and it uses 15-18 GB. With light settings even less than 6 GB.
I2) Problem: launching python relauncher.py takes FIVE MINUTES! When just yesterday it was 30 seconds
Consideing that Gradio freezes every single time, this is increasing time usage for users on Runpod. I already sort of complained about slow download speed on Runpod's channel, and now we have this to make things even slower.
When starting, I get this:
[+] torch version 1.13.1+cu117 installed.
[+] torchvision version 0.14.1+cu117 installed.
[!] xformers version 0.0.16rc425 installed.
[+] accelerate version 0.17.1 installed.
[+] bitsandbytes version 0.35.4 installed.
[+] diffusers version 0.14.0 installed.
[+] transformers version 4.27.1 installed.
Launch errors detected:
Incorrect version of xformers installed.
3) Problem with X/Y/Z Plot: for some reason Prompt S/R which was working fine, now it doesn't. I tried to use different tokens, and make sure the syntax is correct. I get this error:
RuntimeError: Prompt S/R did not find prsr:1.0 in prompt or negative prompt.
Or
RuntimeError: Prompt S/R did not find abc:1.0 in prompt or negative prompt.
RuntimeError: Prompt S/R did not find fff: 1.0 in prompt or negative prompt.
I tried all combinations, with space, without, with comma, etc, and the same token in the prompt like "photo of (xyz man: prsr) " or "photo of (xyz man: abc) "
It worked once, then stopped working.
Also maximum size of grid is 200 MB.
Consideing that Gradio freezes every single time, this is increasing time usage for users on Runpod. I already sort of complained about slow download speed on Runpod's channel, and now we have this to make things even slower.
When starting, I get this:
[+] torch version 1.13.1+cu117 installed.
[+] torchvision version 0.14.1+cu117 installed.
[!] xformers version 0.0.16rc425 installed.
[+] accelerate version 0.17.1 installed.
[+] bitsandbytes version 0.35.4 installed.
[+] diffusers version 0.14.0 installed.
[+] transformers version 4.27.1 installed.
Launch errors detected:
Incorrect version of xformers installed.
3) Problem with X/Y/Z Plot: for some reason Prompt S/R which was working fine, now it doesn't. I tried to use different tokens, and make sure the syntax is correct. I get this error:
RuntimeError: Prompt S/R did not find prsr:1.0 in prompt or negative prompt.
Or
RuntimeError: Prompt S/R did not find abc:1.0 in prompt or negative prompt.
RuntimeError: Prompt S/R did not find fff: 1.0 in prompt or negative prompt.
I tried all combinations, with space, without, with comma, etc, and the same token in the prompt like "photo of (xyz man: prsr) " or "photo of (xyz man: abc) "
It worked once, then stopped working.
Also maximum size of grid is 200 MB.
IConsideing that Gradio freezes every single time, this is increasing time usage for users on Runpod. I already sort of complained about slow download speed on Runpod's channel, and now we have this to make things even slower.
FIs realistic vision 1.3 also baked? I did several tests with Dreambooth but never reached a 100% similarity
NHi guys! I need a little help!
NI have been following the instructions on this video - https://www.youtube.com/watch?v=aAyvsX-EpG4&ab_channel=SECourses-SoftwareEngineeringCourses
YouTubeSECourses - Software Engineering Courses
Our Discord : https://discord.gg/HbqgGaZVmr. How to use custom, different, .safetensors and SD 2.1 on Automatic1111 Web UI. If I have been of assistance to you and you would like to show your support for my work, please consider becoming a patron on https://www.patreon.com/SECourses
Playlist of Stable Diffusion Tutorials, Automatic1111 and Go...
https://www.patreon.com/SECoursesPlaylist of Stable Diffusion Tutorials, Automatic1111 and Go...
ZI'm first on the queue!
N
Ngot my models and yaml files in the correct folder
NI edited the "webui-user.bat" to have the parameters "--xformers --no-half"
ZSo.... what's the error you get?
NBut "webui-user.bat" fails -
N
N
Nwhen I remove the parameters "--xformers --no-half" , then it works for 1 model, but not the other 2
Nseems like the yaml files are causing problems
Nit works when the yaml is removed from the directory
N
Ngot all three working now by removing the yamls
Kyou can't copy-paste cmd lines from description.. it copies like this: pip install --no-deps --force-reinstall https://github.com/ArrowM/xformers/re...
Z
Don't upgrade to Pytorch 2 if you have a 1080/TI GPU!You will need to delete your VENV folder and download it again to get it generating images again.
message.txt8.17KB
!about the new Torch2 video; if I have a GTX1060 will I still get the performance gains?
SNice to meet you all. I just got into this hobby this week and an digging the videos. Really helps a ton. That said, this seems bad!
Fhi welcome. after you changed requirements version please delete venv folder and restart. it should install all. and dont forget --xformers in command line arguments
Fdont forget --xformers in command line arguments
Frestart and if still not fixed delete venv folder. it should get fixed
Fyou must have a prompt error somewhere. can you show screenshot of settings
Fi think 1xxx series are not supported yet. several people reported that. i am looking for supported card list.