Hi @walmis - Looking for a quick release mount for the Rhino and wondered if the screw dimensions we

Hi @walmis - Looking for a quick release mount for the Rhino and wondered if the screw dimensions were the same as anything else? I ask because the monstertech plate you supplied was for something else right? Maybe a large Virpil base? Or is it unique and the monstertech is bespoke to the Rhino? Thanks!

MMattGoodman Hi @walmis - Looking for a quick release mount for the Rhino and wondered if the...

walmis•5/10/23, 1:00 PM

Hi, the MT plate was custom designed for the Rhino.

Wwalmis Hi, the MT plate was custom designed for the Rhino.

MattGoodmanOP•5/10/23, 1:02 PM

ah, good to know! I'll have to work something out then as it's all mounted to a 8040 alu frame on a yaw2 and need to keep weight down so want to swap out the rhino weight for a fanatec csl dd when driving. Been tricky to find a solution so far

Jon (Bounty_V)•5/10/23, 1:07 PM

I assume m8 or m6 screws

Jon (Bounty_V)•5/10/23, 1:08 PM

Fastest would be to quick release where the monstertech mount interfaces with the 8040 frame

Jon (Bounty_V)•5/10/23, 1:09 PM

I'm planning to do something similar for throttle

Jju_caesar You definitely do have an increased risk of shearing off the teeth with only 3.6...

Jacob M•5/10/23, 1:19 PM

great thanks for the response

JJon (Bounty_V)Fastest would be to quick release where the monstertech mount interfaces with th...

MattGoodmanOP•5/10/23, 4:33 PM

Thanks. It could be either m8 or m6. For everything else I've used the quick releases from https://qr4rigs.com/ which have been great for swapping out pedals with rudders and the wheel and they do have some generic ones so I'm seeing what can be done there

QR4Rigs, Quick release Mounts for Sim Rigs, Change your rig in seco...

QR4Rigs, Quick release Mounts for Sim Rigs : - Quick Release System Fanatec Authentikit Honeycomb Kensington Logitech/Saitek MFG MOZA Racing SIMagic Simucube Thrustmaster VRS Virpil (VPC) VKB Dust Plates Winwing Universal QR4rigs Systems 40-Series Profile Interface Kits Quick Release Base Mounts VNM Turtle Beach quick release, quick release mou...

Jon (Bounty_V)•5/10/23, 4:34 PM

itd likely be 16-20mm in length

Jon (Bounty_V)•5/10/23, 4:34 PM

i think the monstertech mounts use counter sink screws so more likely to be 16mm

JJon (Bounty_V)i think the monstertech mounts use counter sink screws so more likely to be 16mm

MattGoodmanOP•5/10/23, 4:38 PM

I'm currently mounting the rhino using the custom monstertech to a 4040 peice coming out from the long 8040 sides most rigs have as the foundation and that's working fine. Just wanted a faster way of removing it. I think Q4Rigs might have something, just need to dig down and be creative

Jon (Bounty_V)•5/10/23, 4:39 PM

Yeah since you already have it then you'll know exact lengths you need etc.

Jon (Bounty_V)•5/10/23, 4:41 PM

Speaking of, do you or anyone else happen to know what these circled parts would be called? Appear to be some sort of bolt spacer or something.

MattGoodmanOP•5/10/23, 4:58 PM

I've not seen those before, they look useful though. Hope you find them!

JJon (Bounty_V)Speaking of, do you or anyone else happen to know what these circled parts would...

FlatSpin•5/10/23, 5:08 PM

You could always ask Randy from Laserwing since those pics are from his simpit.

Jon (Bounty_V)•5/10/23, 5:12 PM

True, I just didn't want to bother them if I didn't have to

Jon (Bounty_V)•5/10/23, 7:34 PM

https://fselite.net/content/jardesign-shares-preview-for-co-pilot-add-on-for-msfs/ For the MSFS players, this looks very promising even in early development stage

FSEliteCalum

JarDesign Shares Preview for Co-Pilot Add-On For MSFS - FSElite

Have a virtual co-pilot be able to interact with your aircraft in Microsoft Flight Simulator.

Reed•5/10/23, 11:55 PM

Just unboxed it.

Reed•5/10/23, 11:55 PM

PPiNKSH!T the DCS heli's force trim should 'just work' otb with the Rhino, just make sure ...

Reed•5/11/23, 12:29 AM

Excellent, just got home and unboxed. Will be a few days before I can install. My goal for now is getting the DCS helo's to work. I fly the 60 and huey mostly, but also give the 64 and mi8 some love.

inpayne•5/11/23, 1:21 AM

Will be pretty much good to go out the box with the basic software

RReed Click to see attachment

TonyM•5/11/23, 4:09 AM

What is the certificate behind? Are you a real life heli pilot?

TTonyM What is the certificate behind? Are you a real life heli pilot?

Boosted•5/11/23, 4:11 AM

It says 1000 flights as EMT, sooooooo I'm guessing flight medic

BBoosted It says 1000 flights as EMT, sooooooo I'm guessing flight medic

TonyM•5/11/23, 4:22 AM

ok! Interesting!

BBoosted It says 1000 flights as EMT, sooooooo I'm guessing flight medic

Jehly•5/11/23, 6:09 AM

Flight nurse.

Jehly•5/11/23, 6:09 AM

I’d guess?

VPforceBot•5/11/23, 10:17 AM

:package:

RHINO #0095 Has Shipped!

VPforceBot•5/11/23, 10:17 AM

:package:

RHINO #0096 Has Shipped!

Jon (Bounty_V)•5/11/23, 10:19 AM

I think that's mine

JJon (Bounty_V)I think that's mine 😮

PiNKSH!T•5/11/23, 10:20 AM

well your names red

Anthony•5/11/23, 12:15 PM

It’s a sign!

Jon (Bounty_V)•5/11/23, 1:18 PM

I have shipping info now

Jon (Bounty_V)•5/11/23, 1:18 PM

The import fee for US was like $30-50 right

Subsonic•5/11/23, 2:13 PM

Likely a silly question...
I am looking at ordering a kit....and I see them listed as
86BLF03 x1 and 86BLF03 x2 and such.
I am assuming I need to order an x2 kit to build the stick base yes?
Thanks

walmis•5/11/23, 2:28 PM

Yeah, 1x is for pedals(or steering wheel) and 2x is for stick base

Subsonic•5/11/23, 2:37 PM

Thanks!

Subsonic•5/11/23, 2:46 PM

so the 57f03 kit is best for the stick base ? Any sense in going with the stronger ones for the base?