you could get like 50+ hours
you could get like 50+ hours
Ayes exactly 
Aso i tried to train, it didn't work, i think it was something either with torch or xformers, did a pip uninstall/install xformers, now i try to start kohya and get this root@b12c8b7fa1ad:/workspace/kohya_ss# bash gui.sh --share
Validating that requirements are satisfied.
Error: The following packages have the wrong version:
- timm==0.6.12 (expected version torch==1.12.1, found version 2.0.1)
Run upgrade.sh or pip install -U -r /workspace/kohya_ss/requirements.txt to resolve the missing requirements listed above...
root@b12c8b7fa1ad:/workspace/kohya_ss#
Validating that requirements are satisfied.
Error: The following packages have the wrong version:
- timm==0.6.12 (expected version torch==1.12.1, found version 2.0.1)
Run upgrade.sh or pip install -U -r /workspace/kohya_ss/requirements.txt to resolve the missing requirements listed above...
root@b12c8b7fa1ad:/workspace/kohya_ss#
F@AlaBeat did you make venv in that folder? like in video
Ayes i have made venv
Fbut it is using your system wide torch version
Fnot using your venv
Fif you are our patreon supporter i can connect your pc and install
Ai will install again torch in venv folder, even though i've done it already
Fsomething missing. it should use venv
Fnot system wide default venv
AMake sure you activate your venv, just creating it does not activate it automatically
Awill do it again, got an error saying i'm out of space
Fye you need to increase runtime space because temp files will take space
Aok....
message.txt6KB
Ftry a fresh pod i think. /workspace/kohya_ss/venv/bin/python3: No module named pip
Aok now how to fix this error when i start the train
message.txt4.35KB
Fhow much vram you have?
Fah you are on runpod
Fdont use xformers
Ai tried once with xformers installed and it worked, on runpod... will try a new pod without installing xformers
Ado i do pip uninstall xformers on the new runpod too?
Awhen using this current runpod, not the new one, i get this thing (not error) WARNING:xformers:WARNING[XFORMERS]: xFormers can't load C++/CUDA extensions. xFormers was built for:
PyTorch 2.0.1+cu118 with CUDA 1108 (you have 1.12.1+cu116)
when not using xformers i get oom errors with 3090...
PyTorch 2.0.1+cu118 with CUDA 1108 (you have 1.12.1+cu116)
when not using xformers i get oom errors with 3090...
Athat was why i want to use xformers
Aoh well.. fuck it no more runpod for me
A3090 has 24GB of VRAM so its an issue with your settings, you shouldn't face OOM with 24GB VRAM
AAlso fix your xformers version
Asettings where the same as my last session on runpod using xformers... something is wrong with runpod giving me all kinds of erros when i try to use xformers
Awhen i try to not use xformers i get oom on even batch size 2
Ai'll just train on my pc until they fix xformers
ADid you do this?
Ai've only done this:
git clone https://github.com/bmaltais/kohya_ss.git
cd kohya_ss
python3 -m venv venv
source venv/bin/activate
./setup.sh -n
source venv/bin/activate
apt update
apt-get install python3.10-tk
pip3 install torch torchvision torchaudio --index-url https://download.pytorch.org/whl/cu118
pip uninstall xformers
pip install xformers
git clone https://github.com/bmaltais/kohya_ss.git
cd kohya_ss
python3 -m venv venv
source venv/bin/activate
./setup.sh -n
source venv/bin/activate
apt update
apt-get install python3.10-tk
pip3 install torch torchvision torchaudio --index-url https://download.pytorch.org/whl/cu118
pip uninstall xformers
pip install xformers
GitHub
Contribute to bmaltais/kohya_ss development by creating an account on GitHub.
Fthis will change your torch version : pip install xformers
Fi think just uninstall xformers and dont reinstall
Fit is not necessary with 24 gb
A(venv) root@2fba617cc7bd:/workspace/kohya_ss# pip3 install https://huggingface.co/MonsterMMORPG/SECourses/resolve/main/xformers-0.0.19-cp310-cp310-manylinux2014_x86_6
Collecting https://huggingface.co/MonsterMMORPG/SECourses/resolve/main/xformers-0.0.19-cp310-cp310-manylinux2014_x86_6
ERROR: HTTP error 404 while getting https://huggingface.co/MonsterMMORPG/SECourses/resolve/main/xformers-0.0.19-cp310-cp310-manylinux2014_x86_6
ERROR: Could not install requirement https://huggingface.co/MonsterMMORPG/SECourses/resolve/main/xformers-0.0.19-cp310-cp310-manylinux2014_x86_6 because of HTTP error 404 Client Error: Not Found for url: https://huggingface.co/MonsterMMORPG/SECourses/resolve/main/xformers-0.0.19-cp310-cp310-manylinux2014_x86_6 for URL https://huggingface.co/MonsterMMORPG/SECourses/resolve/main/xformers-0.0.19-cp310-cp310-manylinux2014_x86_6
Collecting https://huggingface.co/MonsterMMORPG/SECourses/resolve/main/xformers-0.0.19-cp310-cp310-manylinux2014_x86_6
ERROR: HTTP error 404 while getting https://huggingface.co/MonsterMMORPG/SECourses/resolve/main/xformers-0.0.19-cp310-cp310-manylinux2014_x86_6
ERROR: Could not install requirement https://huggingface.co/MonsterMMORPG/SECourses/resolve/main/xformers-0.0.19-cp310-cp310-manylinux2014_x86_6 because of HTTP error 404 Client Error: Not Found for url: https://huggingface.co/MonsterMMORPG/SECourses/resolve/main/xformers-0.0.19-cp310-cp310-manylinux2014_x86_6 for URL https://huggingface.co/MonsterMMORPG/SECourses/resolve/main/xformers-0.0.19-cp310-cp310-manylinux2014_x86_6
Asorry copy and paste error by me:
Ayeah xformers just doesn't want to work...
A@Furkan Gözükara SECourses have you found this setting to make much difference within your experiments? I find setting it to 0.40 instead of 0.75 results in much less over training.
Fye xformers didnt work
Fi will look for a working one
Fwell this is a worthy experiment actually
Fi havent done yet
MHi everyone, just found my way to this discord after learning a lot from SECourses Youtube videos.
However I am stuck and I could really use some help.
I re-installed stable diffusion with the first method in this video - https://www.youtube.com/watch?v=AZg6vzWHOTA&t=726s
With this github repo - https://github.com/EmpireMediaScience/A1111-Web-UI-Installer
My Dreambooth extension after installing does not show up in my tabs, I have reloaded and restarted my UI a couple of times.
FYI I ended up reinstalling StableDiffusion web ui from scratch as I did have Dreambooth extension showing up earlier but not being able to generate any models, it would stop at 0 steps.
To further add on to this. I watched this video while attempting to trouble shoot the issue - https://www.youtube.com/watch?v=pom3nQejaTs&t=243s
Deleted the extension folder, deleted venv folder, started again with the reinstalls but nothing changed.
There is one thing though, that is beyond my understanding. The 'transformers' version in my dreambooth 'requirements' file is this transformers~=4.26.1 # > 4.26.x causes issues (db extension #1110) and the one in my 'requirement_version' file is this transformers==4.25.1. I tried copy pasting the version from my extension to the main webui, I don't think it helped either.
However I am stuck and I could really use some help.
I re-installed stable diffusion with the first method in this video - https://www.youtube.com/watch?v=AZg6vzWHOTA&t=726s
With this github repo - https://github.com/EmpireMediaScience/A1111-Web-UI-Installer
My Dreambooth extension after installing does not show up in my tabs, I have reloaded and restarted my UI a couple of times.
FYI I ended up reinstalling StableDiffusion web ui from scratch as I did have Dreambooth extension showing up earlier but not being able to generate any models, it would stop at 0 steps.
To further add on to this. I watched this video while attempting to trouble shoot the issue - https://www.youtube.com/watch?v=pom3nQejaTs&t=243s
Deleted the extension folder, deleted venv folder, started again with the reinstalls but nothing changed.
There is one thing though, that is beyond my understanding. The 'transformers' version in my dreambooth 'requirements' file is this transformers~=4.26.1 # > 4.26.x causes issues (db extension #1110) and the one in my 'requirement_version' file is this transformers==4.25.1. I tried copy pasting the version from my extension to the main webui, I don't think it helped either.
YouTubeSECourses
Our Discord : https://discord.gg/HbqgGaZVmr. How to download and install Stable Diffusion Automatic1111 Web UI interface. If I have been of assistance to you and you would like to show your support for my work, please consider becoming a patron on 
https://www.patreon.com/SECourses
Playlist of Stable Diffusion Tutorials, Automatic1111 and Goog...
https://www.patreon.com/SECoursesPlaylist of Stable Diffusion Tutorials, Automatic1111 and Goog...
GitHub
Complete installer for Automatic1111's infamous Stable Diffusion WebUI - GitHub - EmpireMediaScience/A1111-Web-UI-Installer: Complete installer for Automatic1111's infamous Stable D...
YouTubeSECourses
Discord : https://bit.ly/SECoursesDiscord. Torch 2 / Pytorch 2 is now supported along with new DreamBooth Automatic1111 Web UI extension. If I have been of assistance to you and you would like to show your support for my work, please consider becoming a patron on https://www.patreon.com/SECourses
In this video, I am explaining how you can man...
https://www.patreon.com/SECoursesIn this video, I am explaining how you can man...
Fhi welcome
Fyes dreambooth installation now required different approach
FYouTubeSECourses
Discord : https://bit.ly/SECoursesDiscord. Torch 2 / Pytorch 2 is now supported along with new DreamBooth Automatic1111 Web UI extension. If I have been of assistance to you and you would like to show your support for my work, please consider becoming a patron on https://www.patreon.com/SECourses
In this video, I am explaining how you can man...
https://www.patreon.com/SECoursesIn this video, I am explaining how you can man...
MHi @Furkan Gözükara SECourses thanks for the reply.
I have tried up until the deletion of the 'venv' folder from this tutorial actually, but the extension is still not showing up. Do you think it may be because of the differences in my 'requirements' file as I added on to my earlier message?
I have tried up until the deletion of the 'venv' folder from this tutorial actually, but the extension is still not showing up. Do you think it may be because of the differences in my 'requirements' file as I added on to my earlier message?
AYeah, there are so many variables, its really tricky to try and get the perfect settings
MAlright I did everything in that video probably thrice by now lol and I am still having no luck on Dreambooth showing up in my Web UI 
Fyou are installing on windows right?