Quality Improvements
Printer:
Ratrig Vcore 3.1 v400
Phaetus Rapido2 UHF Plus
LGX Lite
Esun PLA+ @200°
Nozzle 0.4
Layer height 0.2
Flow rate : 90%
Hello, After a few test and tuning i print this cali-dragon to check if there are issue.
I have notice that the surfaces are not so smooth. Any ideas?
I have tested Pressure Advance, Extrusion,Cooling and Temperature and Input Shaping.
Perfect First layer Adhesion of course
Best Regards
2 Replies
flat-fuchsia•10mo ago
It’s hard to see what you’re talking about on such a small print with that shiny filament. Can you print a annex or voron test cube? Both prints are larger and have features that will help narrow down what element of the printing process is to blame.
Annex: https://github.com/Annex-Engineering/Misc_Designs/blob/e3fa169/3030_test_object/STL/Test%20cube%20logo%203030%2075deg.STL
Voron: https://github.com/VoronDesign/Voron-2/blob/3b4c0e4a4/STLs/Test_Prints/Voron_Design_Cube_v7.stl
GitHub
Misc_Designs/3030_test_object/STL/Test cube logo 3030 75deg.STL at ...
Misc Designs that dont have a home. Contribute to Annex-Engineering/Misc_Designs development by creating an account on GitHub.
GitHub
Voron-2/STLs/Test_Prints/Voron_Design_Cube_v7.stl at 3b4c0e4a4e8808...
Voron 2 CoreXY 3D Printer design. Contribute to VoronDesign/Voron-2 development by creating an account on GitHub.
absent-sapphire•10mo ago
i see the problem of the last optimization with esun 