remove magnetic adhesive sheet.
I have a strange mesh so i think and see a lot of air Bubbles trapped between magnetic adhesive sheet and metal bed.
Is there a simple way to remove the adhesive and replace with another One?
Do i warm the bed and peel off the adhesive sheet?
Best regards
Lorenzo
11 Replies
Poke a needle where the air bubbles are and squeegee the area, that should get ther air out and reseal itself. If you try to get the sheet off, it won' t easy, the 3M glue is tenacious.
the needle fix doesnt work, so i will remove and re apply my magnetic adhesive
ambitious-aqua•13mo ago
I think you will regret this decision. You can use trick like this https://www.youtube.com/shorts/gKSOTbF-KlQ
bruh NO
just cut out small holes if you need to
where the bubbles are
dont reapply
you can use a fishing line
but NO
Ok, i discover that i have a not squared gantry
This Is the bed mesh of my metal bed without the adhesive
Use some layers of heat resistant tape on top of the magnetic plate. Worked fine for me
Aluminum foil will work as well.
Fixed,now my First layer is good
Sorry,removed and now it's better
Not easy but with a lot of time and patience i removed the magnetic sheet
What did you use
Fishing line
?
Nope
Heated the bed at 120° and then gentrly removed the sheet
And plastic spatula