Am I correct in my interpretation of the official Rhino diagram pdf that the dimensions of a mountin

Am I correct in my interpretation of the official Rhino diagram pdf that the dimensions of a mounting plate that would fit perfectly under the unit would be 180mm x 180.32mm?

Bblave549 I am runnning my apparently obsolete Reverb G2 on an RTX2060 Super, if you can b...

Ophelia•10/10/23, 4:03 AM

TIL my headset is "obsolete"

VPforceBot•10/10/23, 6:31 AM

:package:

RHINO #0212 Has Shipped!

VPforceBot•10/10/23, 7:41 AM

:package:

RHINO #0213 Has Shipped!

OOphelia TIL my headset is "obsolete"

dco0l•10/10/23, 11:05 AM

Once you get the FOV mod I'd say it's still pretty much one of the best. The clarity on the Reverb is just superb. I've seen some comparisons to some Pico headsets that have a higher resolution but the clarity is quite a bit worse so you don't gain anything and you'd lose some FPS

GeezAlbert•10/10/23, 8:19 PM

!status

GGeezAlbert !status

VPforceBot•10/10/23, 8:19 PM

Hey @geezalbert,
So the last Shipped RHINO is #0212 on 2023-10-10
Average waiting time from preorder to shipped is 206 days, median is 219 days, max is 292 days
211 Rhinos are shipped in total

PPoor Yurik Am I correct in my interpretation of the official Rhino diagram pdf that the dim...

walmis•10/11/23, 9:36 AM

Yep, that's correct

VPforceBot•10/11/23, 9:44 AM

:package:

RHINO #0214 Has Shipped!

GeezAlbert•10/11/23, 7:49 PM

!status

GGeezAlbert !status

VPforceBot•10/11/23, 7:49 PM

Hey @geezalbert,
So the last Shipped RHINO is #0214 on 2023-10-11
Average waiting time from preorder to shipped is 206 days, median is 220 days, max is 292 days
212 Rhinos are shipped in total

GeezAlbert•10/11/23, 7:53 PM

Hello I’m wondering if anybody is selling their design using the diy motor kit

GGeezAlbert Hello I’m wondering if anybody is selling their design using the diy motor kit

PiNKSH!T•10/12/23, 3:13 AM

Hey m8 I can't say for sure but I haven't seen anyone asking money for the diy design plans/files, though I think ppl were working on offering diy kits to go with the motor kits from vpforce. Check out #

showcase & #

diy-builds for the ppl that have made their own & ask if they have plans/files.

VPforceBot•10/12/23, 8:34 AM

:package:

RHINO #0215 Has Shipped!

VPforceBot•10/12/23, 9:04 AM

:package:

RHINO #0216 Has Shipped!

PPiNKSH!T Hey m8 I can't say for sure but I haven't seen anyone asking money for the diy d...

GeezAlbert•10/12/23, 11:42 AM

Thanks man

VVPforceBot :package: 🇳🇿 **RHINO #0216** Has Shipped!

TrigaNZ•10/12/23, 6:01 PM

Another Kiwi !

RReed Click to see attachment

Fierce_Fire•10/12/23, 6:23 PM

What is that extention made of? Is it a custom or a readily available part?

Fierce_Fire•10/12/23, 6:35 PM

@walmis I read that the VKB adapter has 6 set screws to connect it to a DIY extension solution, is this correct and if so, where would they be located? And also, if one were to use tubes to mount the adapter, what would be a recommended inner diameter for these? Thanks.

FFierce_Fire What is that extention made of? Is it a custom or a readily available part?

Reed•10/12/23, 7:57 PM

from ebay. its al.

Fierce_Fire•10/12/23, 7:57 PM

Any idea what it might be called?

Fierce_Fire•10/12/23, 7:58 PM

Hmm I think i found it

Fierce_Fire•10/12/23, 7:58 PM

thank you

GGeezAlbert Hello I’m wondering if anybody is selling their design using the diy motor kit

N7783L•10/12/23, 8:10 PM

What @PiNKMuD said but there are designs pinned in this Discord in the diy-builds channel. Links to the necessary files point to Github repositories. There you can find the link to pull it all down as a zip file.

@Subsonic (Protomaker) posted this one: https://github.com/protomaker964/Rhino-FFB-Clone-3D_Printed/tree/main

And @Number481 posted this about adding force feedback to pedals: https://github.com/Number481/VirpilACE-VPForce-Mod

@Subsonic (Protomaker) - How is your 3D printed version holding up? Nice looking work!

GitHub

GitHub - protomaker964/Rhino-FFB-Clone-3D_Printed: 3D print files, ...

3D print files, parts list and instructions to build a DIY version of the Rhino FFB Stick base using the VPForce motor kit - GitHub - protomaker964/Rhino-FFB-Clone-3D_Printed: 3D print files, parts...

GitHub

GitHub - Number481/VirpilACE-VPForce-Mod: DIY VPForce 86BLF-03 kit ...

DIY VPForce 86BLF-03 kit mod for the Virpil ACE rudder pedals - GitHub - Number481/VirpilACE-VPForce-Mod: DIY VPForce 86BLF-03 kit mod for the Virpil ACE rudder pedals

NN7783L What @PiNKMuD said but there are designs pinned in this Discord in the diy-build...

GeezAlbert•10/12/23, 8:10 PM

thanks! very kind of you

N7783L•10/12/23, 8:14 PM

The one Subsonic posted looks exactly like the full Rhino but I haven’t really dug into it yet.

GeezAlbert•10/12/23, 8:20 PM

ill have a look

NN7783L What @PiNKMuD said but there are designs pinned in this Discord in the diy-build...

Subsonic•10/12/23, 9:23 PM

3d Printed unit is holding up just fine. No creaks or tweaks.
Use Carbon PETG for the gimbal and stick assembly and should work fine and last a long time.

NN7783L The one Subsonic posted looks exactly like the full Rhino but I haven’t really d...

Subsonic•10/12/23, 9:24 PM

It is essentially, with a few minor differences such as the gimbal/stick and fan locations.

N7783L•10/12/23, 9:24 PM

Thanks for that, Subsonic! And thanks for posting the files!

NN7783L Thanks for that, Subsonic! And thanks for posting the files!

Subsonic•10/12/23, 9:26 PM

Most welcome...enjoy!

TTrigaNZ Another Kiwi !

ddrake1984•10/12/23, 10:41 PM

Yeah, there are a few of you

VPforceBot•10/13/23, 8:31 AM

:package:

RHINO #0217 Has Shipped!

VPforceBot•10/13/23, 9:16 AM

:package:

RHINO #0218 Has Shipped!

FFierce_Fire @walmis I read that the VKB adapter has 6 set screws to connect it to a DIY exte...

walmis•10/13/23, 9:28 AM

I don't really understand what you're asking here

walmis•10/13/23, 9:29 AM

VPforce VKB adapter looks like this.

Wwalmis I don't really understand what you're asking here 😅

Fierce_Fire•10/13/23, 10:41 AM

How would I attemt to attach this to something? I believe it has threads on the bottom, I could try to 3d print something that fits. Is there another method that was included or was that a solution by a diy'er? Also, what is the outer diameter of the plastic part? Ive found the dia of the metal one but not the plastic. Or do you have a step file I could use?

Stryker990•10/13/23, 10:44 AM

If i put myself on the preorder list i can cancel anytime right? Not 100% yet if i wanna spend this much and 1 year would give me a bit time to think about it

SStryker990 If i put myself on the preorder list i can cancel anytime right? Not 100% yet if...

walmis•10/13/23, 10:55 AM

Yeah, sure

FFierce_Fire How would I attemt to attach this to something? I believe it has threads on the ...

walmis•10/13/23, 10:55 AM

It has a standard thread M36x2 like Virpil, Thrustmaster, WinWing uses

Fierce_Fire•10/13/23, 11:04 AM

Thanks, Ill see if I can use that

FFierce_Fire @walmis I read that the VKB adapter has 6 set screws to connect it to a DIY exte...

Mustang 1-1•10/13/23, 2:02 PM

Sorry man, I made my own custom Virpil extension. It’s not the rhino one. I CNC’d it from metal.

MMustang 1-1 Sorry man, I made my own custom Virpil extension. It’s not the rhino one. I CNC’...

Mustang 1-1•10/13/23, 2:02 PM

I think I confused you about that.

Stryker990•10/13/23, 2:23 PM

put in my preorder for a rhino see ya guys in a year

MMustang 1-1 I think I confused you about that.

Fierce_Fire•10/13/23, 2:41 PM

Ah yeah thats where it probably comes from. All good in the end though, thanks for the info you gave

Mustang 1-1•10/13/23, 3:34 PM

I don’t use it, if you are interested you can have it

Fierce_Fire•10/13/23, 3:54 PM

Unfortunately im in EU so shipping would be thing, plus im planning on using the vkb grip since it has the right hats/ministicks I wanna use

Fierce_Fire•10/13/23, 3:55 PM

I think Ill be able to use my schools' workshop to thread a tube, should be able to get things done that way

Fierce_Fire•10/13/23, 4:12 PM

Though on the other hand, what would the cost be for shipping to the NL?

Fierce_Fire•10/13/23, 4:12 PM

Cause I should be able to use it to mount the vkb adapter

Snubblaren•10/14/23, 6:38 AM

Anyone who has tips for grips? Today o have x56 so I would like something with a similar layout. Is the thrustmaster warthog grip a good choice or should I go for something else?

Am I correct in my interpretation of the official Rhino diagram pdf that the dimensions of a mountin

Similar Threads

Similar Threads

Similar Threads