![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
Spider v2.3 flash
I’m trying to set up a new build with a spider v2.3 board on RatOS because I’ve only used Fluidd on past machines and want to give RatOS/Mainsail a try. I realize my build is a bit custom but I’m trying it anyway.
Q: will a 2.3 board flash with the firmware build in RatOS for a 1.1 board?
I’d prefer to flash over USB without an SDcard but after setting jumpers to 5.5v/USB and 3.3/Boot0 I’m able to get an ls serial by ID for the board and I can see it in lsusb, but the make flash FLASH_DEVICE:0483:df11 command fails in the dfu utility error 255
Any suggestions?
Q: will a 2.3 board flash with the firmware build in RatOS for a 1.1 board?
I’d prefer to flash over USB without an SDcard but after setting jumpers to 5.5v/USB and 3.3/Boot0 I’m able to get an ls serial by ID for the board and I can see it in lsusb, but the make flash FLASH_DEVICE:0483:df11 command fails in the dfu utility error 255
Any suggestions?
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,070Members
Resources
Recent Announcements
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}