Software Engineering Courses (SECourses)•3y ago

Does the order of prompts matter? Example1: big beautiful sun, bright sun Example2: bright sun, big

Does the order of prompts matter?
Example1: big beautiful sun, bright sun
Example2: bright sun, big beautiful sun

Ereshkigal•11/25/23, 4:05 AM

I still can't figure out my why my Dreambooth training is coming out with such bad results

guess I'm going to watch the Kohya one & see if I can do that instead. No matter what I do I can't recreate how great my first LoRA training was - and it was off 60 images when I got a good result too, doesn't make any sense. Edit: Apparently my first LoRA was also not that great, I just looked at it again & with the LoRA not applied at all vs on, there's barely any difference LUL

Ereshkigal•11/25/23, 4:09 AM

Like, the result is so bad that if I just do the person's name with no LoRA, the rendered face looks almost the same as if I use the LoRA, in a given checkpoint (and it doesn't look anywhere near close enough). So it's basically doing nothing. I'm just using them as an example, once I get one face to train successfully, I have quite a few people I want to train... but gotta get one to work first

Ereshkigal•11/25/23, 4:14 AM

Which version of Dreambooth would y'all recommend using? Cuz right now I'm just using whatever the one was on the install list under Extensions, which the good Doctor already told me I should use an older version, just not sure which to get.

nostaticnoheat•11/25/23, 4:58 AM

Is there anyone who offers one-on-one training or a special support tier I can access to get help?

nostaticnoheat•11/25/23, 5:00 AM

I'm having a difficult time following the tutorials, I've got through the installation process...

nostaticnoheat•11/25/23, 5:02 AM

but the setup / training part... I've been stuck, going from video to video and getting no where.

nostaticnoheat•11/25/23, 5:03 AM

Please, send me a DM with your rates.

nostaticnoheat•11/25/23, 5:03 AM

I don't want to waste anymore time, I want to get started.

FFurkan Gözükara SECourses https://www.patreon.com/posts/sota-very-best-90744385

RETRO•11/25/23, 6:02 AM

unfortunately, i can't pay for your patreon. is there any other way i could access the kaggle notebooks?

Ereshkigal•11/25/23, 7:04 AM

Question, I'm working on getting TensorRT stuff working... where do I need to put the checkpoint for the SD VAE? That wasn't explained in the video lol
Edit: i figured it out

sexyboi•11/25/23, 8:11 AM

Does anybody know what the big difference is between training with diffusers vs kohya? It looks like diffusers is a dependency of kohya. One can do training in diffusers... So what is the purpose of kohya?

AAIGambino Does the order of prompts matter? Example1: big beautiful sun, bright sun Examp...

Furkan Gözükara SECourses•11/25/23, 11:00 AM

yes

Furkan Gözükara SECourses•11/25/23, 11:00 AM

first ones more important

EEreshkigal Which version of Dreambooth would y'all recommend using? Cuz right now I'm just ...

Furkan Gözükara SECourses•11/25/23, 11:01 AM

currently if you have GPU

Furkan Gözükara SECourses•11/25/23, 11:01 AM

sdxl 24 gb config

Furkan Gözükara SECourses•11/25/23, 11:01 AM

dreambooth

Furkan Gözükara SECourses•11/25/23, 11:01 AM

if you dont have a free kaggle SDXL

Furkan Gözükara SECourses•11/25/23, 11:01 AM

dreambooth

Ssexyboi Does anybody know what the big difference is between training with diffusers vs ...

Furkan Gözükara SECourses•11/25/23, 11:27 AM

kohya is more advanced

Nnostaticnoheat Is there anyone who offers one-on-one training or a special support tier I can a...

Furkan Gözükara SECourses•11/25/23, 11:27 AM

i am giving 1 to 1 help

Furkan Gözükara SECourses•11/25/23, 11:46 AM

llava running locally auto installer coming

Digital [Starburst]•11/25/23, 12:53 PM

Why would ControlNet not show up in the interface even though it is installed and activated? I've tried everything I can to get it to show up, and it simply won't.

Digital [Starburst]•11/25/23, 12:54 PM

I've disabled, enabled, installed, uninstalled, reinstalled all to no avail. The extensions sections says it is installed and activated, but it isn't visible in the Automatic1111 ui nor are the Settings available.

DDigital [Starburst]Why would ControlNet not show up in the interface even though it is installed an...

Furkan Gözükara SECourses•11/25/23, 12:59 PM

check cmd

Digital [Starburst]•11/25/23, 1:26 PM

I suspect you already knew what was wrong based on previous discussions.

Digital [Starburst]•11/25/23, 1:28 PM

It was my own fault for screwing up the install.

Digital [Starburst]•11/25/23, 1:28 PM

Such is the learning curve.

aesthetic•11/25/23, 1:30 PM

hi, i just updated from 8gb to 16gb 4060ti. should i update my driver from 537 to 546.17? I've heard nvidia updates are whack.. please guide @Dr. Furkan Gözükara

Digital [Starburst]•11/25/23, 1:34 PM

I take it I should not be using automatic Nvidia driver updates then?

Digital [Starburst]•11/25/23, 1:35 PM

I thought when you installed CUDA it installed the latest driver automatically regardless of the version of CUDA you were installing.

Digital [Starburst]•11/25/23, 1:39 PM

I'll be putting in a new card as well.

Digital [Starburst]•11/25/23, 1:50 PM

I've had to install SD at least 5 or 6 times so far to get it right. No promises I'll get it right this time either.

Digital [Starburst]•11/25/23, 1:51 PM

I'm using the Patreon installers as much as possible.

Digital [Starburst]•11/25/23, 1:53 PM

For instance the auto-installers Dr. Gozukara designed install special models that run with Tensor. Without understanding that, you can install it, but it won't be utilized if you do not install the models.

Digital [Starburst]•11/25/23, 1:54 PM

I wonder how many are installing TensorRT without actually using it.

Digital [Starburst]•11/25/23, 2:15 PM

So should I downgrade my Nvidia driver to 537 or leave it at 546.17 as it is? The new video card I will be putting in is a 4070ti 12GB. I don't know if that's important or not.

Digital [Starburst]•11/25/23, 2:18 PM

I appear to have fixed the ControNet issue by reinstalling everything.

Digital [Starburst]•11/25/23, 2:19 PM

I need to test it however.

Aaesthetic hi, i just updated from 8gb to 16gb 4060ti. should i update my driver from 537 t...

Furkan Gözükara SECourses•11/25/23, 2:29 PM

yes i would update

Furkan Gözükara SECourses•11/25/23, 2:29 PM

with 16 GB you can do SDXL DreamBooth

DDigital [Starburst]So should I downgrade my Nvidia driver to 537 or leave it at 546.17 as it is? T...

Furkan Gözükara SECourses•11/25/23, 2:29 PM

use latest version

DDigital [Starburst]I appear to have fixed the ControNet issue by reinstalling everything.

Furkan Gözükara SECourses•11/25/23, 2:29 PM

great

Digital [Starburst]•11/25/23, 2:36 PM

Can you run Dreambooth with 12 GB?

Digital [Starburst]•11/25/23, 2:37 PM

Truthfully I didn't even know you could buy a 4060ti with 16 GB.

Digital [Starburst]•11/25/23, 2:38 PM

Thank you for answering my question about the driver.

Digital [Starburst]•11/25/23, 2:39 PM

One must not mess with SD settings when one does not know what one is doing.

Digital [Starburst]•11/25/23, 2:49 PM

Hmm...then Huggingface says, "Yes, it is possible to train DreamBooth on a 16 GB GPU using techniques like 8-bit Adam, fp16 training or gradient accumulation 1. However, fine-tuning the text encoder requires more memory, so a GPU with at least 24 GB of RAM is ideal.

Digital [Starburst]•11/25/23, 2:51 PM

So that would be a no. I cannot run Dreambooth with 12 GB of VRAM, or at least I can't expect anything better than pathetic performance.

Digital [Starburst]•11/25/23, 3:00 PM

Side point: For SDXL 1.0, the requirements are steeper. To support high-res 4K image generation, SDXL 1.0 requires GPUs with at least 12 GB of VRAM and a Windows machine.

DDigital [Starburst]Can you run Dreambooth with 12 GB?

Furkan Gözükara SECourses•11/25/23, 3:03 PM

yes you can run but only SD 1.5

Does the order of prompts matter? Example1: big beautiful sun, bright sun Example2: bright sun, big

Similar Threads