You trained dreambooth?
You trained dreambooth?
DThis indicates overtraining
AHello, after much frustration trying to work with a1111 and controlnets, using a1111 is an API backend service i come to you for help!
I just want someone who can link me json payload they send to a1111 running sdxl where the output makes sense compared to settings things up in the GUI:
-json payload to a1111 for any sdxl checkpoint w. controlnet they use that works, img2img and or txt2img
-also understanding in the api why i cant upload an image for controlNet for txt2img, but only in img2img
-> My problem is when using controlnet in my api call its like im doing regular img2img without the controlnet, and in the api call i cant upload my controlNet. In a1111 i can setup settings for perfect image generation for txt2img, w controlnet, but cant get the same results when running in --api mode, sending the json payload :S
I just want someone who can link me json payload they send to a1111 running sdxl where the output makes sense compared to settings things up in the GUI:
-json payload to a1111 for any sdxl checkpoint w. controlnet they use that works, img2img and or txt2img
-also understanding in the api why i cant upload an image for controlNet for txt2img, but only in img2img
-> My problem is when using controlnet in my api call its like im doing regular img2img without the controlnet, and in the api call i cant upload my controlNet. In a1111 i can setup settings for perfect image generation for txt2img, w controlnet, but cant get the same results when running in --api mode, sending the json payload :S
La11 is horrible for API usage especially with third party plugins injecting, comfy UI albeit more messy to setup at first if youre not familiar, allows for much easier flow and has native API via dev mode
NI trained lora with kohya_ss.
Aare there good guides for getting things started? Like heavy on the developer front? and i mean in general for cloud gpu / api shit / workflow everything. im looking for a hub/journy of learning which is why my question is maybe annoying, but thanks for input about comfy and api, usage.
-> thoughts on where to start with comfy api mode, or i will just google and pray result number 1 is good. But thanks either way.
-> thoughts on where to start with comfy api mode, or i will just google and pray result number 1 is good. But thanks either way.
L
GitHub
The most powerful and modular stable diffusion GUI with a graph/nodes interface. - comfyanonymous/ComfyUI
Lyou'd setup the flow in comfy the way you want, then dump it in api format, and use your favorite language of choice to send a json
AAnyway, last prayer for someone who uses a1111 with --api and can send me the payload they use for successfull image generation:
I just want someone who can link me json payload they send to a1111 running sdxl where the output makes sense compared to settings things up in the GUI:
-json payload to a1111 for any sdxl checkpoint w. controlnet they use that works, img2img and or txt2img
-also understanding in the api why i cant upload an image for controlNet for txt2img, but only in img2img
-> feel free to delete, im just begging here with mouth open
I just want someone who can link me json payload they send to a1111 running sdxl where the output makes sense compared to settings things up in the GUI:
-json payload to a1111 for any sdxl checkpoint w. controlnet they use that works, img2img and or txt2img
-also understanding in the api why i cant upload an image for controlNet for txt2img, but only in img2img
-> feel free to delete, im just begging here with mouth open
Bthere is a plugin that will show the json for api call after image generation
BI need to look up the name
Bah it is even mentioned in https://github.com/AUTOMATIC1111/stable-diffusion-webui/wiki/API
GitHub
Stable Diffusion web UI. Contribute to AUTOMATIC1111/stable-diffusion-webui development by creating an account on GitHub.
BGitHub
Display the corresponding API payload after each generation on WebUI - GitHub - huchenlei/sd-webui-api-payload-display: Display the corresponding API payload after each generation on WebUI
DJust 6 epoch?
I have 16
I have 16
Athanks a lot, but damn i feel a bit dumb rn, but fuck me thanks
Bno worries, enjoy 
Fare you sure fooocus has API version? i dont see on readme
Feven lowest tier opens all. but if you register higher thank you
Fare you using rc version? 1.7.
Fyes medvram certainly can fix
Fon foocus you are able to use i think
Fbut havent tried on automatic1111
Fyou should be
Flooks like VAE or resolution mismatch
Fshould be like yours. you can try
Fauto installer working
Fi am trying to make auto installer for dense pose generator
Fspent like 4 hours todaty
Fuse tools of Kohya GUI so easy
Fthis is a pro job. you probably need to pay a lot for a programmer
Lmagic animate seems to have a different color palette than the ones in the linked detectron repo also, or maybe it's just the fact the background is that shade of purple?
Lwould need to also split a video into its images with ffmpeg in a previous step, then apply_net and then reassemble the output images it did looks like
Fthe problem is i still couldnt make detectron2 work 
freaking hard
freaking hardFGitHub
I have installed and working. But there is literally 0 documentation and examples. in the same folder densepose_rcnn_R_101_FPN_DL_s1x.yaml located in the same folder Base-DensePose-RCNN-FPN.yaml lo...
NHello Furkan, DR. Siva replied the following to me:
I am getting the same results , i was able to avoid by
I am getting the same results , i was able to avoid by
- check resolution 1024x1024 ( start with this res)
- Decrease steps to 30
- Use 2M karras sampler
- Use some other models (ProtovisionXL,NightvisionXL)
euler a does produce these, but it has to do with sampling step as well. in my case the last step creates these artificats. Also which lora output number are you using ? For me somewhere from 11-15 gives decent resuilts
Dhttps://github.com/AUTOMATIC1111/stable-diffusion-webui/releases/tag/v1.0.0-pre I haven't downloaded anything other than this.
GitHub
The webui.zip is a binary distribution for people who can't install python and git.
Everything is included - just double click run.bat to launch.
No requirements apart from Windows 10. NVIDIA o...
Everything is included - just double click run.bat to launch.
No requirements apart from Windows 10. NVIDIA o...
DI was told that it updates itself automatically on the citiai discord server
Aim autist from euruope and i think this is sarcasm haha, but yes as a cs person programming shit is actually fucking difficult, like what the f is everything, i have no idea. docker, networkvolumes, gradio, api shit, errors browser. loool. pray for me. service layer.
Lwish my gpu was free right now, this seems promising and it has video input, maybe it does the apply_net step already since it mentions "show visualizations in an opecv window"
not sure if you went through that already however or if any of those models that are pretrained are the same one magic needs
https://detectron2.readthedocs.io/en/latest/tutorials/getting_started.html#inference-demo-with-pre-trained-models
not sure if you went through that already however or if any of those models that are pretrained are the same one magic needs
https://detectron2.readthedocs.io/en/latest/tutorials/getting_started.html#inference-demo-with-pre-trained-models
Lwas going to try on runpod, but it doesn't have an X session to output a "opencv window" to
Loh actually they do have a colab, let's see
D3 days ago I was able to print 2048x2048 images with 4060 8gb vram, but now I can not print.
If idle vram usage can help me in this case, thank you very much in advance.
RuntimeError: Not enough memory, use lower resolution (max approx. 1600x1600). Need: 6.0GB free, Have:4.2GB free I'm dealing with this problem, do you know how to solve it.
If idle vram usage can help me in this case, thank you very much in advance.
RuntimeError: Not enough memory, use lower resolution (max approx. 1600x1600). Need: 6.0GB free, Have:4.2GB free I'm dealing with this problem, do you know how to solve it.
D2 days ago SD-XL update came, could it be related to it?
Dsometimes i just delte VENV folder and let it rebuild , it solves some problems
DI'll try deleting the VENV folder, thank you.
Dclose the automatic1111 and delte the folder
Dstart auto1111 , let it rebuild the venv folder
Dthese are the versions I use @DR.Siva
Dwhy no xformers ?
DI don't know, I just finished the installation and I installed it from this link. @DR.Siva