Software Engineering Courses (SECourses)•2y ago

Not sure if that was for me, but I'm doing local training. I stopped using Kaggle.

DDJRich And set the save every # of steps on the parameters tab?

Furkan Gözükara SECourses•12/31/23, 3:15 PM

yes

DDJRich Not sure if that was for me, but I'm doing local training. I stopped using Kaggl...

Furkan Gözükara SECourses•12/31/23, 3:15 PM

that was for kaggle users

Furkan Gözükara SECourses•12/31/23, 3:17 PM

i am testing 2100 and 4200 steps on kaggle

Furkan Gözükara SECourses•12/31/23, 3:17 PM

since batch size is 2 by default

FFurkan Gözükara SECourses yes

DJRichOP•12/31/23, 3:19 PM

Doing another test now. Keeping the 90 images and following your advice 4590 latents to cache. It's going to take 30 minutes just to do that part and likely another 4 hours to do the training since it is showing to be around 9000 steps

Mmikemenders Can you share your training script?

FiveSAI•12/31/23, 4:02 PM

I finetuned my own base model with 10000 images, i train on that. Dreambooth, same config from his patreon. Except i use blip captions, 40 repeats, and noise ofset

FiveSAI•12/31/23, 4:04 PM

But you can get similar results training on cyberrealistic

mikemenders•12/31/23, 4:58 PM

10000 images with captions... Nice! A huge job.

FiveSAI•12/31/23, 5:12 PM

Yep i trained my own base model, I probably will release it soon when its done, there are still some tweaking needed. I still have another 5-6k images left to train. I captioned those images with llava.

then i train my own models, celebs etc on it. Comes out quite nice

DJRichOP•12/31/23, 5:54 PM

Has anyone seen this before? I have a laptop with a 4090 and 16GB of VRAM. Out of the blue I am starting to get out of memory errors during a hires fix in A1111 where the upscale is only 1300x1700 approximately. The same images worked a couple of days ago without issue. Not running any updated versions of any software and even switched from sdp to xformers because that seemed to help upscale some images that were failing. According to Windows 11 my GPU is using 8.4GB of VRAM just starting A1111. I've tried disabling all extensions and no change. Without A1111 running VRAM is 0.3/16GB.

FFiveSAI Yep i trained my own base model, I probably will release it soon when its done, ...

Lorelai AI•12/31/23, 6:07 PM

do you have any good resources on llava I have been looking at decent captioning. Blip I find not that great nor is git tremendously accurate

DDJRich Has anyone seen this before? I have a laptop with a 4090 and 16GB of VRAM. Out o...

Furkan Gözükara SECourses•12/31/23, 6:10 PM

interesting

LLorelai AI do you have any good resources on llava I have been looking at decent captioning...

Furkan Gözükara SECourses•12/31/23, 6:10 PM

i have auto llava installer

Furkan Gözükara SECourses•12/31/23, 6:10 PM

batch caption as well

Furkan Gözükara SECourses•12/31/23, 6:10 PM

https://www.patreon.com/posts/sota-very-best-90744385

Patreon

SOTA Image Captioning Scripts For Stable Diffusion: LLaVA, BLIP-2, ...

Patreon is empowering a new generation of creators.
Support and engage with artists and creators as they live out their passions!

LLorelai AI do you have any good resources on llava I have been looking at decent captioning...

FiveSAI•12/31/23, 6:10 PM

I used the same one he posted on his Patreon for the auto installer. I had used a previous one before.

I only use llava for fine tuning base models.

I like blip for training people. With an instance prompt

FFurkan Gözükara SECourses i have auto llava installer

Lorelai AI•12/31/23, 6:10 PM

Awesome

FiveSAI•12/31/23, 6:11 PM

If you caption wrong you’ll get bad results

FFiveSAI I used the same one he posted on his Patreon for the auto installer. I had used ...

Lorelai AI•12/31/23, 6:11 PM

I don't understand blip entirely but I found that the higher the beams the worse it got

FiveSAI•12/31/23, 6:12 PM

I usually edit them. Yeah I stopped using higher beams, I just use 1 now. And I change the other setting from 0.9 to 0.7

FFurkan Gözükara SECourses interesting

DJRichOP•12/31/23, 6:12 PM

I just installed the A1111 package from StabilityMatrix with all of the same extensions and it only takes up 4GB of VRAM.

FiveSAI•12/31/23, 6:13 PM

Things I’ll usually caption is just my instance prompt, their hair style, and length, and background.

FFiveSAI Things I’ll usually caption is just my instance prompt, their hair style, and le...

Lorelai AI•12/31/23, 6:14 PM

I also caption anything I wouldn't want in the shot because I feel if the training is inclined to add it I could aways put it in the negative prompt

FiveSAI•12/31/23, 6:17 PM

Also I have started testing removing the backgrounds from my images, also decent results

FiveSAI•12/31/23, 6:17 PM

Idk I’ve never got good results using no captions

DDJRich I just installed the A1111 package from StabilityMatrix with all of the same ext...

Furkan Gözükara SECourses•12/31/23, 6:18 PM

you can also add --medvram and --lowvram

Furkan Gözükara SECourses•12/31/23, 6:18 PM

to auto1111

Furkan Gözükara SECourses•12/31/23, 6:18 PM

will have same effect

FFiveSAI Also I have started testing removing the backgrounds from my images, also decent...

Lorelai AI•12/31/23, 6:19 PM

I need some insight, I am not normally going to train outside of people or anime characters. I want to do Namek before it's getting ready to explode from Dragonball. My questions would be, how many pictures of the planet Namek in that state, should I remove any characters with a magic brush, and Ideally I imagine the class is planet, what type of planet regularization images would I use and where can I get them?

LLorelai AI I need some insight, I am not normally going to train outside of people or anime...

Furkan Gözükara SECourses•12/31/23, 6:20 PM

just skip reg images

Furkan Gözükara SECourses•12/31/23, 6:20 PM

in harder to get cases

FFurkan Gözükara SECourses to auto1111

DJRichOP•12/31/23, 6:20 PM

Yes, but I really shouldn't be seeing this issue with a 16GB card not for such a small hires fix. Especially since it worked perfectly before. I will try the StabilityMatrix version for a while and see if it is more stable than before.

FFurkan Gözükara SECourses just skip reg images

Lorelai AI•12/31/23, 6:20 PM

that's a good idea

LLorelai AI I need some insight, I am not normally going to train outside of people or anime...

FiveSAI•12/31/23, 6:20 PM

Outside of people I don’t use reg images

Lorelai AI•12/31/23, 6:21 PM

What about people in the shot if I can't get enough training images without. And how many training images? 14 just like people?

FiveSAI•12/31/23, 6:21 PM

Well for backgrounds you could get away with just using 10 images

FFiveSAI Well for backgrounds you could get away with just using 10 images

Lorelai AI•12/31/23, 6:24 PM

Awesome! There's actually a bunch of good images online for Namek's destruction I should be good there

LLorelai AI Awesome! There's actually a bunch of good images online for Namek's destruction ...

FiveSAI•12/31/23, 6:24 PM

You can probably rip some from the old dragon ball games

FFiveSAI You can probably rip some from the old dragon ball games

Lorelai AI•12/31/23, 6:25 PM

I'd get them from the actual show if i had to

FiveSAI•12/31/23, 6:25 PM

For sure, you could probably dabble in img to img, to upscale and get better quality

FFiveSAI For sure, you could probably dabble in img to img, to upscale and get better qua...

Lorelai AI•12/31/23, 6:27 PM

I use pixelcut, you actually helped me refine most of my process. The biggest tweaks I changed though were I don't use blip and pretty much manually caption the git captions and I use a training rate of .001, that was a huge improvement. And I thought .001 was high, but documentation says that AdamW is optimal at .001

Lorelai AI•12/31/23, 6:29 PM

learning rate I mean

Sathish H•12/31/23, 6:36 PM

Hi All, One question, i want to train stable diffusion to create pictures with background of local tourist places. Any suggestion on how to train, technique etc.

SSathish H Hi All, One question, i want to train stable diffusion to create pictures with b...

Furkan Gözükara SECourses•12/31/23, 6:44 PM

you need to collect lots of good images

Furkan Gözükara SECourses•12/31/23, 6:44 PM

then you can llava caption them and train

Furkan Gözükara SECourses•12/31/23, 6:45 PM

or with activation token + caption

Furkan Gözükara SECourses•12/31/23, 6:45 PM

you should experiment

SSathish H Hi All, One question, i want to train stable diffusion to create pictures with b...

Lorelai AI•12/31/23, 6:56 PM

I'm about to do my first one I can give you feedback on how it went

FFurkan Gözükara SECourses or with activation token + caption

Sathish H•12/31/23, 7:26 PM

Thank you

tom•12/31/23, 9:28 PM

Hmm. Tried a few times. I keep getting the following error : orch.cuda.OutOfMemoryError: CUDA out of memory. Tried to allocate 2.00 MiB (GPU 0; 14.76 GiB total capacity; 12.34 GiB already allocated; 3.75 MiB free; 13.47 GiB reserved in total by PyTorch. I've gone down to train just 9 1024x1024 images with this same error. Is there a way to flush the gpu or something? cudnn doesn't register.

Not sure if that was for me, but I'm doing local training. I stopped using Kaggle.

Similar Threads

Similar Threads

Similar Threads