![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
Beacon Probe doesn't work after ratos/mainsail is ready
I am trying to get beacon probe running but i am having problems with it not triggering. My nozzle made frieds with the print surface two times already.
What is very interesting..
My printer AC 230V is switched by a shelly relay.
If the shelly and the rpi are off, nothing works of course.
If i power up the rpi and wait for it to go online, i connected to the Webinterface and it says not ready, obviously because there is no 24V to the Mainboard and Toolboard.
In this state the beacon triggers on everything that is remotely metal. (LED goes on)
As soon as i activate the shelly relay and, the psu powers on and supplies 24V. After the main- and Toolboard are up and running, mainsail says everything is fine but now the beacon no longer triggers on anything.
Someone got an idea?
What is very interesting..
My printer AC 230V is switched by a shelly relay.
If the shelly and the rpi are off, nothing works of course.
If i power up the rpi and wait for it to go online, i connected to the Webinterface and it says not ready, obviously because there is no 24V to the Mainboard and Toolboard.
In this state the beacon triggers on everything that is remotely metal. (LED goes on)
As soon as i activate the shelly relay and, the psu powers on and supplies 24V. After the main- and Toolboard are up and running, mainsail says everything is fine but now the beacon no longer triggers on anything.
Someone got an idea?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}