`ujust toggle-updates`

H

HikariKnightOP•1/19/24, 10:43 AM

then you manually do

rpm-ostree update

rpm-ostree update

rpm-ostree update

rpm-ostree update i believe, however you will lose out on your distroboxes and flatpaks being auto updated, you will have to do

ujust update

ujust update

J

johnsmith•1/19/24, 10:48 AM

man, now there is just for everything, nice! thank you

H

HikariKnightOP•1/19/24, 11:06 AM

its been there since before i joined the team

KKyle Gospo aww rip, I forgot about that

E

EyeCantCU•1/19/24, 12:05 PM

I'll have a look at his ISO kick-starts and see

R

RodoMa92•1/19/24, 1:25 PM

@Kyle Gospo I saw my ssd pegged at my max temperature and I thougth that tuned wanted to kill my charge controller /s

R

RodoMa92•1/19/24, 1:25 PM

Or it was some APST bug from Linux 6.6.11.

R

RodoMa92•1/19/24, 1:26 PM

Luckily it finally got back down as it was supposed to, probably some internal processes not visible from the host.

R

RodoMa92•1/19/24, 1:27 PM

Got quite scared for a moment, TBH XD

RRodoMa92 @Kyle Gospo I saw my ssd pegged at my max temperature and I thougth that tuned w...

R

RodoMa92•1/19/24, 1:27 PM

(Since I could feel the heat coming out from the intake grille of the Deck)

R

RodoMa92•1/19/24, 1:29 PM

I'll probably implement this in PowerTools in decky, but this might be useful for other people to know here

R

RodoMa92•1/19/24, 1:29 PM

1) sudo nvme get-feature /dev/nvme0n1 -f 0x10 -H
    (0x10 = Host Controlled Thermal Management Feature)
    If "NVMe status: Invalid Field in Command: A reserved coded value or an unsupported value in a defined field(0x2)" exit -> Not Supported
Else
2) Allow benchmarking with different temperature set and show bandwidth + temperature differences + battery consumption differences (?):
    for setting temperature: sudo nvme set-feature /dev/nvme0n1 -f 0x10 -v 0x<Temp For Begin Throttling In Kelvin Hex, 4 hex numbers><Temp For Hard Throttling In Kelvin Hex, 4 hex numbers> -s (for asking the SSD controller to permanently save, see below)

    This parameter might be claimed as salvable (AKA persistent after an SSD shutdown like sleep and power off). My Samsung PM991a does claim that, but it just lie and I need to reset the value after each SSD wakeup. Check for that in software.

    Allow to change power profiles depending if on battery or plugged in?

1) sudo nvme get-feature /dev/nvme0n1 -f 0x10 -H
    (0x10 = Host Controlled Thermal Management Feature)
    If "NVMe status: Invalid Field in Command: A reserved coded value or an unsupported value in a defined field(0x2)" exit -> Not Supported
Else
2) Allow benchmarking with different temperature set and show bandwidth + temperature differences + battery consumption differences (?):
    for setting temperature: sudo nvme set-feature /dev/nvme0n1 -f 0x10 -v 0x<Temp For Begin Throttling In Kelvin Hex, 4 hex numbers><Temp For Hard Throttling In Kelvin Hex, 4 hex numbers> -s (for asking the SSD controller to permanently save, see below)

    This parameter might be claimed as salvable (AKA persistent after an SSD shutdown like sleep and power off). My Samsung PM991a does claim that, but it just lie and I need to reset the value after each SSD wakeup. Check for that in software.

    Allow to change power profiles depending if on battery or plugged in?

1) sudo nvme get-feature /dev/nvme0n1 -f 0x10 -H
    (0x10 = Host Controlled Thermal Management Feature)
    If "NVMe status: Invalid Field in Command: A reserved coded value or an unsupported value in a defined field(0x2)" exit -> Not Supported
Else
2) Allow benchmarking with different temperature set and show bandwidth + temperature differences + battery consumption differences (?):
    for setting temperature: sudo nvme set-feature /dev/nvme0n1 -f 0x10 -v 0x<Temp For Begin Throttling In Kelvin Hex, 4 hex numbers><Temp For Hard Throttling In Kelvin Hex, 4 hex numbers> -s (for asking the SSD controller to permanently save, see below)

    This parameter might be claimed as salvable (AKA persistent after an SSD shutdown like sleep and power off). My Samsung PM991a does claim that, but it just lie and I need to reset the value after each SSD wakeup. Check for that in software.

    Allow to change power profiles depending if on battery or plugged in?

1) sudo nvme get-feature /dev/nvme0n1 -f 0x10 -H
    (0x10 = Host Controlled Thermal Management Feature)
    If "NVMe status: Invalid Field in Command: A reserved coded value or an unsupported value in a defined field(0x2)" exit -> Not Supported
Else
2) Allow benchmarking with different temperature set and show bandwidth + temperature differences + battery consumption differences (?):
    for setting temperature: sudo nvme set-feature /dev/nvme0n1 -f 0x10 -v 0x<Temp For Begin Throttling In Kelvin Hex, 4 hex numbers><Temp For Hard Throttling In Kelvin Hex, 4 hex numbers> -s (for asking the SSD controller to permanently save, see below)

    This parameter might be claimed as salvable (AKA persistent after an SSD shutdown like sleep and power off). My Samsung PM991a does claim that, but it just lie and I need to reset the value after each SSD wakeup. Check for that in software.

    Allow to change power profiles depending if on battery or plugged in?

R

RodoMa92•1/19/24, 1:29 PM

You might want to have a service to do this automatically like on mine.

R

RodoMa92•1/19/24, 1:30 PM

(I'm capping mine to 70/65 max for peace of mind)

R

RodoMa92•1/19/24, 1:31 PM

This basically allows you to set a temperature before the SSD begin to throttle back to reenter a lower temperature.

R

RodoMa92•1/19/24, 1:35 PM

More information about this here:

R

RodoMa92•1/19/24, 1:35 PM

https://nvmexpress.org/resource/technology-power-features/

NVM Express

Technology Power Features - NVM Express

NVMe™ Technology Power Management Features NVM Express (NVMe) architecture contains various features to manage the power of SSDs. In the data center, this can be used to throttle an SSD to a specific TDP (thermal design power) to manage platform thermals and total power draw. Max power is usually defined by a given form factor

R

RodoMa92•1/19/24, 2:15 PM

@Kyle Gospo They should begin to pay me at this point /s

R

RodoMa92•1/19/24, 2:15 PM

https://gitlab.com/evlaV/jupiter-fan-control/-/commit/535aebd2b579f74962c91dc2a8b3e334ba65ca1b

GitLab

remove dry-run (535aebd2) · Commits · evlaV / jupiter-fan-control ·...

GitLab.com

A

Al-Mumin•1/19/24, 2:17 PM

gotta ask how to make my own just commands whatever i like?

S

Shiina•1/19/24, 2:23 PM

Did turning off my monitor put Bazzite in like sleep mode?

Jjohnsmith because I want to update when I want and look at whats going to be updated

©

©TriMoon™•1/19/24, 2:29 PM

Because

uBlue

uBlue

uBlue

uBlue type of operating systems, which

Bazzite

Bazzite

Bazzite

Bazzite is also one of, are distribution controlled complete setups (aside from user configs and data), they go beyond "rolling" kind of distro's.
That means you have no choice in what to accept or not in an update like in other distro's.
The only freedom you have is when you allow the update to download, because the actual update will be performed at bootup.

It's a little different as all other distro's we are used to, but i kinda like the idea so far

DISCLAIMER:
I'm a fresh user of

Bazzite

Bazzite

Bazzite

Bazzite,

uBlue

uBlue

uBlue

uBlue and

Fedora

Fedora

Fedora

Fedora in general.

©©TriMoon™Because `uBlue` type of operating systems, which `Bazzite` is also one of, are d...

S

Shiina•1/19/24, 2:31 PM

I'm a fresh user tool

S

Shiina•1/19/24, 2:32 PM

Lol*

T

toxicunderGroov•1/19/24, 2:33 PM

Running Bazzite on my AMD desktop connected to C2 4K@120hz - how can i find out if RGB is working correctly?

©

©TriMoon™•1/19/24, 2:33 PM

RGB in what context? / What you mean by RGB?

T

toxicunderGroov•1/19/24, 2:34 PM

that its not displaying sRGB - C2 doesnt display that as part of its VRR info

©

©TriMoon™•1/19/24, 2:34 PM

ahh

©

©TriMoon™•1/19/24, 2:35 PM

Well i guess you could check which video mode you are actually using?

SShiina It already is connected to Ethernet but how does the controller turn the PC on j...

H

HikariKnightOP•1/19/24, 2:37 PM

wake on lan should work out of the box if enabled in bios it seems like

T

toxicunderGroov•1/19/24, 2:37 PM

it's connected by hdmi, used to not work properly in linux

HHikariKnight wake on lan should work out of the box if enabled in bios it seems like

A

Al-Mumin•1/19/24, 2:38 PM

so, do you know how to add my own just commands aka ujust test as example

TtoxicunderGroov it's connected by hdmi, used to not work properly in linux

©

©TriMoon™•1/19/24, 2:38 PM

I'm using a HDMI connection to my monitor also.
Trying to find where to look

AAl-Mumin so, do you know how to add my own just commands aka ujust test as example

H

HikariKnightOP•1/19/24, 2:38 PM

~/.justfile

~/.justfile

~/.justfile

~/.justfile

A

Al-Mumin•1/19/24, 2:38 PM

huh

H

HikariKnightOP•1/19/24, 2:39 PM

you add your own commands there

HHikariKnight you add your own commands there

A

Al-Mumin•1/19/24, 2:39 PM

oh i never seen th at file so thanks bro

H

HikariKnightOP•1/19/24, 2:40 PM

make sure you read the documentation

S

Shiina•1/19/24, 2:40 PM

When does the update drop btw?

©

@toxicunderGroov Does this screen help in anyway for the info you are looking for?

H

HikariKnightOP•1/19/24, 2:40 PM

there is a ctrl+clickable link at the top when you run

ujust

ujust

HHikariKnight make sure you read the documentation

A

Al-Mumin•1/19/24, 2:41 PM

wheres that

SShiina When does the update drop btw?

H

HikariKnightOP•1/19/24, 2:41 PM

kyle is most likely the chief on that and if i remember correctly it is morning where he is so "later today

"

R

RodoMa92•1/19/24, 2:41 PM

Prompt overriden Konsole on bazzite-deck

H

HikariKnightOP•1/19/24, 2:42 PM

@DarkSkill line above your question

R

RodoMa92•1/19/24, 2:42 PM

using

ujust restore-original-terminal

ujust restore-original-terminal

ujust restore-original-terminal

ujust restore-original-terminal dosesn't work sadly.

R

RodoMa92•1/19/24, 2:42 PM

Even after a reboot @Kyle Gospo

R

RodoMa92•1/19/24, 2:43 PM

(When I try to open a terminal with a right click on a open folder)

RRodoMa92 (When I try to open a terminal with a right click on a open folder)

©

From within

Dolpin

Dolpin

Dolpin

Dolpin?
In what way is the prompt overridden?
Or do you plan to actually override it yourself?

R

RodoMa92•1/19/24, 2:45 PM

Yes, from Dolphin.

R

RodoMa92•1/19/24, 2:45 PM

Just by updating.

Similar Threads

Similar Threads

Similar Threads