FYes, the board has a power regulator smth so as long as you stay within its spec nothing should happen to the motors
TAlright, tyvm
MThats a sale right here.....any idea of timescale Walmis?
BHard to say no to that
AI'd estimate you'll get yours some time after I get mine
AI have a Virpil Blackhawk Grip attached to my DIY Collective and connected to the Rhino USB Board. All buttons are recognized, but when i press any of the Hat buttons (up/down,left/right), the corresponding center press button also lights up. I currently have it set to Generic grip, but tried all the other options and there is no change in behaviour. I’ve also tried both the options Hat switch as button, and 4-way Hat.
Any ideas to get this working correctly?
Any ideas to get this working correctly?
WVirpil hats need additional decoding, do any of the existing Virpil grip profiles work for the blackhawk grip?
Can you DM me the "Generic grip (debug)" output in the Debug tab and I'll also need the mapping for the hats, table like this would be very useful. I'll add a new profile to the firmware
Can you DM me the "Generic grip (debug)" output in the Debug tab and I'll also need the mapping for the hats, table like this would be very useful. I'll add a new profile to the firmware
W
AHow do i get the Generic Grip debug output?
Wselect
Generic grip (debug)
Cit says MSFS isnt enabled even thouigh i have the game open? anyone know how to fix?
AHere is the CSV file. Is that the correct Debug file?
ABtw: the #2 Button also acts as the Hat buttons. When pressing Up. both Up (13) and Press (12) are lighted.
WAlso please include the Grip debug data as shown 
N1.) You'll want to grab the latest 'WiP" version (see pinned messages here: https://discord.com/channels/965234441511383080/1093558100713279508)
2.) Check out the manual (Section 4.2) https://docs.google.com/document/d/1YL5DLkiTxlaNx_zKHEYSs25PjmGtQ6_WZDk58_SGt8Y/edit#heading=h.ghj8phqmqr7y
While the WIP version is linked in the doc and the github readme, its not always obvious that you probably want that version
2.) Check out the manual (Section 4.2) https://docs.google.com/document/d/1YL5DLkiTxlaNx_zKHEYSs25PjmGtQ6_WZDk58_SGt8Y/edit#heading=h.ghj8phqmqr7y
While the WIP version is linked in the doc and the github readme, its not always obvious that you probably want that version
AYou mean a printscreen of the debug window? Isn't that the same as the samples.csv? Sorry for being a noob..
A
T@walmis Hello. I think the F03 motor I purchased is DOA.
CGot it thank youi
TI turned off my system and swapped with the F04 and it gave all the expected readings on the left panel. Also twisted the axis and showed movement.
TWhen I switched back to this F03 motor, this is what I get
T
T
WCan you check the motor IDs?
Thold on
T
WSo yeah, this one is with Pitch id
WYou need to disable X and enable Y in the configurator
TWorking now! Tyvm!
T
TBTW, is there any information concerning the date when we will be able to preorder/order the FFB kit for the MFGs pedals?
MLast news was late Feb due to a parts shortage on the bigger motors, so hopefully any day now
CLooking to get an extension cord for my vkb adapter. Not sure what type of cable it is. Any help?
WIt's a GX12 cable
MHi, a few weeks back, I set up VP Force config with some differing profiles for various modules. I had this working nicely, so when I flew the F14,. it loaded my F14 profile, the F5 , the F5 profile etc. However, it now appears to have stopped working.....Telem FFB does not register the correct module on the GUI anymore for example, I just flew in the Hornet and Telem FFB b was saying it was an F14.....it appears stuck on F14....any ideas what might be going on and how I might be able to unfuck it? Thanks! I have checked and in the system/edit sim section, each jet has the correct vpconf file selected at the bottom.....
Ncan you create a support bundle (help menu) and post that here, or post your userconfig xml file? Sounds like maybe you have an overzealous match string set up
Also a screenshot of TelemFFB when you are in a aircraft like the F18, but TelemFFB is loading the config for the F14
Also a screenshot of TelemFFB when you are in a aircraft like the F18, but TelemFFB is loading the config for the F14
CHey @walmis I just received a 2nd rhino order near completion message, I must have been signed up twice somehow. I wanted to know that this 2nd order could be cancelled and pushed out to the next lucky customer.
MSure, just had a look but could not find the xml file....can you point me?
S
NYou can create the support bundle per above (which includes config and logs) or you can open the config directory from the system menu
MThx, here they are
userconfig.xml32.88KB
MNHmm. That is something I’ve never seen. It’s not TelemFFB mistaking the aircraft for the F14 or a bad match string… DCS is telling us it’s the F14. The
The TelemFFB export script doesn’t modify what we read from the sim before sending to TelemFFB so that data is coming from DCS.
N: field in the telemetry is exactly what we are getting from DCS. The TelemFFB export script doesn’t modify what we read from the sim before sending to TelemFFB so that data is coming from DCS.
NAre you one of the super secret squirrel beta testers testing an unreleased version of DCS? 
I suppose it’s possible some mod or another is messing with DCS badly enough to cause this.
You can try deleting the TelemFFB export script from DCS and then let TelemFFB reinstall it, but i doubt that will be it.
I suppose it’s possible some mod or another is messing with DCS badly enough to cause this.
You can try deleting the TelemFFB export script from DCS and then let TelemFFB reinstall it, but i doubt that will be it.
Pgetting to the order point now(finally!! ) for my Slaw F16 rudder pedals FFB conversation....and thinking the DIY FFB kit: 86BLF04 x1 + USB version- though it says out of stock 
:any ideas when the 04 motor kit will be available to order again @walmis or is there a kit due soon for ffb conversation
:any ideas when the 04 motor kit will be available to order again @walmis or is there a kit due soon for ffb conversationVHi @walmis, hi all, I'm having an issue. Just unpacked my DIY kit and powered it on.
Motor X is offline, Motor Y is Ok, USB is connected. Firmware is 1.0.16. The motor X looks powered and blink green. It looks like address or RS-485 is wrong or something like that.
How to fix it?.
Motor X is offline, Motor Y is Ok, USB is connected. Firmware is 1.0.16. The motor X looks powered and blink green. It looks like address or RS-485 is wrong or something like that.
How to fix it?.
WHi, disable the unused axis (Y) using the checkbox
WI hope to receive new stock during March.
MIn that instance, as you can see, I was using the F18, but Telem was stuck thinking it was the F14. Going to turn everything on again this morning and check…….I will turn off all mods as well…….
WDoes the telemetry update while flying?
