Software Engineering Courses (SECourses)•2y ago

I don't have a huge drive so I will divide my LORAs and my CHECKPOINTs in two diferent folders, one

I don't have a huge drive so I will divide my LORAs and my CHECKPOINTs in two diferent folders, one folder for LORAs and CHECKPOINTs in the drive D and other folder with other LORAs and CHECKPOINTs in the drive E. I want to have two separeted folders in two different drivers with the same installation of A1111. For this reason I want to edit the BAT file but I don't know how to.

Ppianogospel I don't have a huge drive so I will divide my LORAs and my CHECKPOINTs in two di...

Furkan Gözükara SECourses•3/4/24, 4:25 PM

sure easy

Furkan Gözükara SECourses•3/4/24, 4:25 PM

let me show

Ppianogospel I don't have a huge drive so I will divide my LORAs and my CHECKPOINTs in two di...

Furkan Gözükara SECourses•3/4/24, 4:26 PM

set COMMANDLINE_ARGS=--xformers --ckpt-dir "R:\model" --lora-dir "R:\lora"

set COMMANDLINE_ARGS=--xformers --ckpt-dir "R:\model" --lora-dir "R:\lora"

Furkan Gözükara SECourses•3/4/24, 4:26 PM

change your paths accordingly

FFurkan Gözükara SECourses ```set COMMANDLINE_ARGS=--xformers --ckpt-dir "R:\model" --lora-dir "R:\lora"```

pianogospelOP•3/4/24, 4:28 PM

and this way it will keep the original folder plus this one?

Ppianogospel and this way it will keep the original folder plus this one?

Furkan Gözükara SECourses•3/4/24, 4:32 PM

i think it only uses 1 folder

Furkan Gözükara SECourses•3/4/24, 4:32 PM

multiple folders would be good i agree

pianogospelOP•3/4/24, 4:33 PM

Thanks

Fred•3/4/24, 5:09 PM

@Dr. Furkan Gözükara Do i still need to downgrade to v21.8.4 of Kohya SS when training dreambooth on SD 1.5? Found from your patreon: https://www.patreon.com/posts/best-stable-1-5-90307694. I've been using your settings for SDXL dreambooth, but found that there did not exists any openpose for SDXL and i need to control the pictures generated.. Will try with SD 1.5

Patreon

Patreon is empowering a new generation of creators.
Support and engage with artists and creators as they live out their passions!

FFred @Dr. Furkan Gözükara Do i still need to downgrade to v21.8.4 of Kohya SS when t...

Furkan Gözükara SECourses•3/4/24, 5:17 PM

i think they fixed

Furkan Gözükara SECourses•3/4/24, 5:17 PM

also our latest SD 1.5 config works on latest version

protector131090•3/4/24, 5:20 PM

i made a clean install of KOhya and now i dont get error when LORA extract. Git pulling oldd version didnt help. Only clean reinstall for ome reason

Pprotector131090 i made a clean install of KOhya and now i dont get error when LORA extract. Git ...

Furkan Gözükara SECourses•3/4/24, 5:22 PM

nice at least solved

FFurkan Gözükara SECourses also our latest SD 1.5 config works on latest version

Fred•3/4/24, 5:34 PM

Was that the config in the Patreon post that I linked?

Narva•3/4/24, 5:46 PM

Model called epiCPhotoGasm last version is pretty good

barepixels•3/4/24, 6:10 PM

should all stage1 references be remove from the GUI?

Bbarepixels should all stage1 references be remove from the GUI?

Furkan Gözükara SECourses•3/4/24, 7:47 PM

We may remove not useful

FFred Was that the config in the Patreon post that I linked?

Furkan Gözükara SECourses•3/4/24, 7:48 PM

Kohya sd 1.5 https://www.patreon.com/posts/very-best-kohya-97379147

Patreon

The Very Best Kohya GUI Workflow & Config For SD 1.5 Based Models D...

Patreon is empowering a new generation of creators.
Support and engage with artists and creators as they live out their passions!

NNarva Model called epiCPhotoGasm last version is pretty good

Furkan Gözükara SECourses•3/4/24, 7:48 PM

Nice can be tested

AeitoArk•3/4/24, 8:02 PM

@Dr. Furkan Gözükara is there any way to rollback to supir v14 ?

AeitoArk•3/4/24, 8:03 PM

its taking twice as long for me on the latest version and worse results

rafraf•3/4/24, 8:08 PM

hi @Dr. Furkan Gözükara what's this gradio error?

rafraf•3/4/24, 8:08 PM

also no module called requests.

rafraf•3/4/24, 8:08 PM

i installed your v19 and threw in the models

AAeitoArk @Dr. Furkan Gözükara is there any way to rollback to supir v14 ?

barepixels•3/4/24, 9:33 PM

I don't have v1.4 installed, but v1.7 quality is better than v1.9

Furkan Gözükara SECourses•3/4/24, 9:42 PM

there shouldnt be this stuff

Furkan Gözükara SECourses•3/4/24, 9:42 PM

are you aware not it default selects Linear CFG?

Furkan Gözükara SECourses•3/4/24, 9:43 PM

i can turn it off

Rrafraf hi @Dr. Furkan Gözükara what's this gradio error?

Furkan Gözükara SECourses•3/4/24, 9:43 PM

looks like same folder name repeat error

Furkan Gözükara SECourses•3/4/24, 9:43 PM

install into different folde rname

Bbarepixels I don't have v1.4 installed, but v1.7 quality is better than v1.9

Furkan Gözükara SECourses•3/4/24, 9:43 PM

can you test turning off Linear CFG and compare?

Furkan Gözükara SECourses•3/4/24, 9:43 PM

that could be reason

AAeitoArk @Dr. Furkan Gözükara is there any way to rollback to supir v14 ?

Furkan Gözükara SECourses•3/4/24, 9:43 PM

can you test turning off Linear CFG and compare?
that could be reason

Furkan Gözükara SECourses•3/4/24, 9:44 PM

please let me know i will change default according to that

Furkan Gözükara SECourses•3/4/24, 9:45 PM

can you provide me your tested image and prompt? i can compare locally and see

Furkan Gözükara SECourses•3/4/24, 9:47 PM

we have to fix if there is a quality drop

Kallamamran•3/4/24, 9:48 PM

@Dr. Furkan Gözükara Sora is using Diffusion transformers, but the use of those is nothing new. The quality of the output is something else though.
Pixart-alpha is also using diffusion transformers. Have you looked anything into this? https://github.com/PixArt-alpha/PixArt-alpha

GitHub

GitHub - PixArt-alpha/PixArt-alpha: Fast Training of Diffusion Tran...

Fast Training of Diffusion Transformer for Photorealistic Text-to-Image Synthesis - PixArt-alpha/PixArt-alpha

KKallamamran @Dr. Furkan Gözükara Sora is using Diffusion transformers, but the use of those ...

Furkan Gözükara SECourses•3/4/24, 9:49 PM

i know pixart alpha but didnt look carefully yet

Furkan Gözükara SECourses•3/4/24, 9:49 PM

i am adding dynamically shown target output resolution

Furkan Gözükara SECourses•3/4/24, 9:54 PM

pat._.fenis•3/4/24, 9:57 PM

@Dr. Furkan Gözükara Dose the new Patreon Supir setup install a fully functional and up to date version of comfy ui?

Can I install it with out effecting the current stable diffusion a1111 install I have?

Will installing it change the current venv and python versions on my pc?

I only ask because I am in the middle of a large project and I would like to test the upscaling of supir but if I mess up my current A111 install it would be catastrophic.