![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
Consistent Z banding pattern on ASA
I'm printing new parts to update my vcore 3.1 using polymaker Asa and the first one to finish had very consistent z-banding to the point it was a pattern.
No other filament does this and I'm new to working with ASA so it's probably just a settings issue. Likely printed too fast, happy to hear opinions.
Orcaslicer
Qidi max 3
Print speed was 80 for perimeters and 100-120 for infill, grid pattern
250c nozzle
90c bed
60c enclosure.
No other filament does this and I'm new to working with ASA so it's probably just a settings issue. Likely printed too fast, happy to hear opinions.
Orcaslicer
Qidi max 3
Print speed was 80 for perimeters and 100-120 for infill, grid pattern
250c nozzle
90c bed
60c enclosure.
Solution
Answer found! It was due to the inner walls printing first. Set Orcaslicer to outer/inner and it printed properly.
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}